Omega RD100B manual Set= Math Math= Aux Aux= Tag

9.10 Setting Tags on Channels

This section explains the details of setting the tag on computation channels.

Procedure

1.Hold down the MENU key for 3 seconds to enter Setting mode.

2.Press the key or SHIFT + key to select Math and then press the key.

3.Press the key or SHIFT + key to select Aux and then press the key.

4.Press the key or SHIFT + key to select Tag and then press the key.

5.Set each item and press the key.

Use the key or SHIFT + key to select values.

For the procedure on how to enter values or characters, see section 4.2.

If you press the ESC key in the middle of the operation, the settings entered up to then are cancelled, and the display returns to a higher level menu.

6.When the Setting complete screen appears, do either of the following: Press the key to set other channels.

If you are done, press the ESC key.

7.Hold down the MENU key for 3 seconds to return to Operation mode.

Set=			Math
	Math=			Aux
			Aux=			Tag
								Set the channel range.
			CH=		0A		-0A
		First channel Last channel						Set the tag.
			Tag=

ESC/?

0A-0A Channel Setting complete

The new setting takes effect.

Explanation

Characters That Can Be Used for Tags

Set the tag using up to 7 characters. The available characters are as follows:

Alphabet, numbers, symbols (%, #, °, @, +, –, *, /, (, ), ∝, Ω, 2, 3, .), and space

<Related Topics>

Printing tags in place of channel numbers: Section 7.7

9-18