Omega RD100B manual Computed value, Timer number

			4.4		Function Setup Guide
Item	Description				Reference
					Section
Periodic printout
	Mar.31.2004!			Channel number
	15:50*
				or tag
	1	1.000V
				Computed value
	A	-100.00UNIT
	-200.00	200.00		Scale
	A	UNIT
	RED			Recording color
	50mm/h_
	• Type of computed values to be printed/disable periodic printout				7.8
	Common with measurement channels.
	• If Report is selected, use Math > Print2 in Basic Setting mode to select				9.15
	the report data type.
	• Printout interval				9.6
	Set Math > TLOG > Timer No. in Setting mode to Periodic.
	The interval is common with measurement channels.
	• Turn On/Off periodic printout for each channel				9.9
	Use Math > Aux > Print out > Periodic in Setting mode to enable/disable the
	periodic printout for each computation channel.
	• Scale printout and recording color printout (pen model)				7.7
	Common with measurement channels.

Periodic printout using TLOG timer (dedicated to computation channels)

Mar.31.2004!			Channel number
15:50*
			or tag
TAG-00A	100.00UNITA
			Computed value
B	1.0
-200.00		200.00	Scale
TAG-00A		UNITA
RED			Recording color
TLOG1			Timer number

	• Use Math > Timer (TLOG) in Basic Setting mode to set the printout interval.		9.12
	• Use Math > Timer (TLOG) > Print in Basic Setting mode to turn the printout On.		9.12
	• Use Math > Aux > Print out > Periodic in Setting mode to enable/disable the		9.9
		periodic printout for each computation channel.
	• Set Math > TLOG > Timer No. in Setting mode to set the timer used on each		9.6
		computation channel.
	• Scale printout and recording color (pen model)
		Common with periodic printout.
Alarm occurrence/release printout
	Common with measurement channels.		7.7
Tag	•	Channel/tag selection	7.7
		Common with measurement channels.
	•	Tag name	9.10
		Use Math > Aux > Tag in Setting mode to set the tag name.
Bar graph display mode	Use Math > Bar graph in Basic Setting mode to set the bar graph display mode.		9.16
Procedure when computed results are in error
	Use Math > Error data in Basic Setting mode to set the procedure taken when the		9.17
	computed results are in error.

Remote control function (/R1 option)

Item	Description	Reference
		Section
Remote control function (/R1 option)
	• Assign functions to the remote control input terminals	7.18
	Use Remote in Basic Setting mode to set the function to be assigned to the
	remote control input terminal.
	• Secondary chart speed	6.9
	If “chart speed switching” is assigned, use Aux > Chart 2 in Setting mode to
	set the secondary chart speed.

4

Common Operations

for Setting Functions and

Setup Guide

4-17