Installing or Replacing the Chart Paper, Stopper | Omega RD100B

3.2 Installing or Replacing the Chart Paper

CAUTION

•Do not install or remove the chart cassette with the chart paper guide open. This may damage the stopper.

•Continuing to record or print without the chart paper on the dot model can cause damage to the chart cassette platen (the cylindrical section that holds the paper during the recording operation). Be sure to replace the chart paper ahead of time.

Loading the Chart Paper

1.Open the door.

If recording is in progress, press the RCD key to stop the recording.

2.Remove the chart cassette.

Gently pressing the left and right stoppers inward. The bottom section of the chart cassette comes out. Gently lift the chart cassette and pull it out from the recorder case.

Stopper

3-4

Image 62

Omega RD100B manual Installing or Replacing the Chart Paper, Loading the Chart Paper, Stopper

Contents

User’s Guide For immediate technical or application assistance Revisions ForewordTrademarks Electronic Manuals Provided on the Accompanying CD-ROM Software Sold Separately Recorder’s Version and Functions Described in This ManualRD100B Versions and Functions Version Suffix Code Added or Modified Functions Reference About This Manual Safety PrecautionsSafety Standards and EMC Standards Iii Handling Precautions of the Software Exemption from Responsibility Checking the Contents of the Package Checking the Contents of the Package Standard AccessoriesOptional Accessories Sold Separately Dot Model Removing the Packing MaterialsPen Model Vii How to Use This Manual Viii Conventions Used in This Manual Contents Setup Operations for Convenient Functions Setting Mode Contents Maintenance Xii Overview of the Recorder Measuring Input Section Input Section Square Root Computation Measuring Input Section Delta ComputationScaling Measuring Input Section Bias Burnout Detection of ThermocouplesReference Junction Compensation of Thermocouple Input Filter and Moving Average Noise Elimination from Input SignalsMeasuring Input Section Filter Pen Model Integration Time of the A/D Converter Model Integration Time of the A/D Converter Alarms Alarm Types Delay High Limit Alarm Example T is the specified delay Alarms Delay High Limit Alarm TDelay Low Limit Alarm t Alarm Hysteresis Alarm Output Relay /A1, /A2, and /A3 Options Alarm IndicationAlarm Recording Non-Hold/Hold Operation of the Alarm Indication Channel Approx ms Approx ms Alarms Reflash AlarmAlarm Functional Alarms AND/OR Operation of Alarm Output RelaysEnergized/De-energized Operation of Alarm Output Relays Description Alarm ACK Operation Alarms Non-Hold/Hold Operation of Alarm Output Relays Recording Recording Method Pen Model Chart SpeedTrend Recording Recording Method Dot Model Compressed Expanded Recording Partial Expanded RecordingPen Offset Compensation Pen Model Same time Printout Printout Example on the Pen Model Recording Printout Example on the Dot Model Functional Description Channel Printout Dot Model Only Periodic Printout Recording Alarm PrintoutPrintout Contents for details, see appendix Interval Manual Printout New Chart Speed PrintoutRecording Turning ON/OFF the Periodic Printout Message Printout Recording Setting Printout Printout Example of List on the Pen Model Printout Example of List on the Dot Model Display Types DisplayDisplayed Information Channel Digital + 1 Bar Graph Display Alarm Status DisplayDate/Time and Chart Speed Flag Display Channels Dedicated to Computations Computation Function /M1 OptionComputation Function Types of Computations Trend Recording Handing of the Unit in ComputationsRecording Computation Channels Assignment of Computation Channels to the Pens Pen Model Starting/Stopping Computation AlarmsDisplay Printout Fail Output FAIL/Chart End Detection and Output Function /F1 OptionChart End Output Fail Relay Output Remote Control Function /R1 Option Remote Signal Edge, Trigger, and Level Remote Control Function /R1 Option Computation Start/StopComputation Reset Rising/Falling edge Trigger Level Ms or more Key Lock Temperature UnitOther Functions Language Before Using the Recorder Handling PrecautionsHandling Precautions Installation Installation Location Front Contact With each other Installation ProcedureInstallation Flat blade External Dimensions of the Recorder Panel Cutout Precautions to Be Taken While Wiring Input Signal WiringGeneral Precautions to Be Taken While Wiring Screw input terminal Arrangement of the Measuring Input TerminalsMeasuring input terminal block Clamped input terminal H2 option Recorder Input Signal Wiring Dot ModelBefore Using DC current input +/A Shunt resistor Measuring Input WiringInput Signal Wiring Crimp-on lug with insulation sleeves for 4 mm screws Optional Terminal WiringArrangement of the Optional Terminals Optional terminal block Optional Terminal Wiring Remote Control Input Terminals Relay Contact Input/Transistor Input Specifications Wiring ProcedureRelay Contact Output Specifications Relay contact output Voltage-free contact Open collector Power Supply Specifications Power Supply WiringPrecautions to Be Taken While Wiring the Power Supply Power Supply Wiring Turning ON/OFF the Power Switch Checking the Date/Time Names of Parts and Run Operations Names of PartsFront Names of Parts Seven keys are available Display and Key PanelStatus display During normal operation CH UP key Rear Panel Names Parts Run Operations Stopper Installing or Replacing the Chart PaperLoading the Chart Paper Chart holder Installing or Replacing the Chart PaperFold chart paper Sprocket teeth Side with Feeding the Chart Paper Display and key panel Installing/Replacing Felt Pens or Plotter Pen Pen ModelReplacing Felt Pens Replacing the Plotter Pen Installing/Replacing the Ribbon Cassette Dot Model Holder tab Hole for the ribbon Feed shaft Ribbon feeding knob Installing/Replacing the Ribbon Cassette Dot ModelCassette holder Starting the Recording Recorded chart paper can be pulled out Front cover tabStarting/Stopping the Recording Stopping the Recording Channel Auto Switching Switching the Display ScreenSwitching the Display Screen Switching the Displayed Channel Using Keys Aborting the Manual Printout Printing Measured Values Manual PrintoutStarting the Manual Printout Aborting the Setup Printout Printing the Recorder SettingsStarting the Setup Printout Starting the List Printout Clearing the Alarm Printout Buffer Buf.clear=Alarm Printing a Message Displays the preset messagePrinting Messages Clearing the Message Printout Buffer Resetting the Report Data of the Periodic Printout Resetting the Report Data Alarm Output Relay Operation Releasing the Alarm Output Alarm ACK OperationReleasing the Alarm Output Alarm Alarm output relay Blinking Alarm indication Releasing the Key Lock Activating/Releasing the Key LockActivating the Key Lock Run Modes Exiting from Setting Mode Returning to Operation Mode Entering Setting ModeEntering Basic Setting Mode Exiting from Basic Setting Mode Returning to Operation Mode Entering Values Changing the SettingsUsing the ESC Key Key Operations Deleting a Character Entering CharactersInserting Characters Copying & Pasting a Character String Menu Structure, Settings, and List of Default Values Operation Menus Using the Func Key Operation Mode Exchange Dot Model Menu Structure of Setting Mode Menu Structure, Settings, and List of Default Values Menu Structure of Basic Setting Mode POC Setup Items in Setting Mode and Their Default Values Setup Items in Basic Setting Mode and Their Default Values RJC RJC Setting initialization Remote control function /R1 option NORMAL/MODBUS Normal Function Setup Guide Description Reference Section Recording functions Description Reference Section Function Setup GuideAlarm functions Description Reference Section Recording color Channel numberOr tag Display functions Description Reference Section Other functions Description Reference Section Timer number Computed value TC, RTD, and DC Voltage Setting the Input RangeFrequently Used Setup Operations Setting Mode N1 Option Setting the Input rangeSelectable Range of Input Range, Span Left, and Span Right Input Type Linear Scaling First channel Last channel Delta ComputationSpan Left and Span Right ON/OFF Input Range Type Selectable Span Values Low-cut 5V InputScale Left and Scale Right Select the right scale value To 5.0% of the recording span, 0.1 steps Square Root ComputationLow-cut and Low-cut Point Set the channel range Select Skip New setting takes effect Skip Unused Channels Setting the Alarm Symbol Name Setting the AlarmAlarm Type Channel Range Difference High Limit Alarm/Difference Low Limit Alarm Relay No Setting the Unit on Scaled Channels Mode Changing the Chart SpeedChart speed on the pen model unit mm/h Recorders with Version 1.02 or Earlier Setting the Date/TimeDate/Time New setting takes effect Functions Setting Mode Setting the Trend Recording Interval Dot ModelSetup Operations for Convenient Functions Setting Mode When set to Auto Setting the Filter Pen Model Filter Time Constant Number of Samples of Moving Average Setting the Moving Average Dot ModelNew setting takes effect Setting Recording Zones for Each Channel Zone Recording Zone Setting the Partial Expanded Recording Expand Trend Recording Dot Model Setting Tags on Channels Characters That Can Be Used for Tags Setting the Message String Characters That Can Be Used for Messages See section Setting the Alarm Delay Duration Duration New setting takes effect Internal Light Brightness Setting the Brightness of the Display and Internal LightDisplay Brightness Applying a Bias on the Measuring Input Signal When bias is On Setup Operations For Convenient Functions Setting Mode Start month, Strt day, and Start time End month, End day, and End time DST Changing the Auxiliary Alarm Function Changing the Settings Changing the Auxiliary Alarm Function Diagnosis Act Changing the Auxiliary Alarm Function ReflashIndicator Behavior Changing the Integration Time of the A/D Converter Integrate Setting the Burnout Detection Function of Thermocouples Burnout Setting the RJC Function on Channels Set to TC Input Setting the RJC Function on Channels Set to TC Input Volt Changing the Channel Recording Color Dot Model Color POC Pen Offset Compensation Turning Printouts ON/OFF Pen model Channel Dot Model AlarmCH/Tag Pen Color Printout Periodic Printout Interval Changing/Adding Functions Basic Setting Mode Types of Report Data to Be Printed Ref. Time SUM scale Functions Basic Setting Mode Setting the Bar Graph Display ModeSetup Graph Setting the Key Lock Function Setting the Key Lock Function Password Operation of Keys to Be Key-Locked Enabling the Moving Average Function Dot Model MovingAVE Enabling the Filter Function Pen Model Filter Enabling the Partial Expanded Recording Function Partial Changing the Display/Recording Language Lang Language Procedure 5V low-cut Alarm delaySqrt low-cut Changing the Time Printout Format Speed Changing the Time Printout FormatRCD On ESC/? Initializing the SettingsBasic=Initialize screen Changing the Settings Remote No Function to Be Assigned Date Format Setting Format ExampleChanging the Printout/Display Format of the Date Changing the Temperature Unit Temp Temperature Setup Operations for Changing Displayed Contents Setup Operations for Changing the Displayed ContentsDisplaying the Data Display Setup Screen Key Operations for Changing the Displayed Information End Data Display Setup MenuKey Operations for Changing the Displayed Information End Flag display Channel Digital Display Changing the Displayed ContentsChanging the Displayed Information Assigning Other Display Types See the menu on the previous Starting the Computation Starting/Stopping/Resetting the ComputationOperations Related to the Computation Function /M1 Option Stopping the Computation Setting the Computing Equation Inserting a Character Description Character Key Type Operator Computing EquationOrder of Precedence in Computations Equation Examples Power and Other ComputationsFour Arithmetic Operation Relational Computation Logical Computation XOR Equation Example 01-02OR03.GT.04 Examples of Equations That Are Not Allowed Tlog ComputationEquation Example Setting the Unit Characters That Can Be Used for Units Setting the Constants Used in Equations Constant Select On to set the alarm. When set Alarm Value Specifying the Timer Used in Statistical Calculations Tlog Timer operation Specifying the Timer Used in Statistical Calculations TlogTimer No Timer # Periodic Set the leftmost value of the recording New setting takes effect Related Topics Dot model Set= Math Math= Aux Aux= Tag Duration Basic=Math Math=TimerTLOG Timer No.=1 Mode=Absolute Timer Type TimersNumber of Timers Absolute Time Mode Timer timeout Reset Reset Reset Reset On Reset Off Example TLOG.SUM computation Select the channel Changing the Channel Assignments of Recording Pens Pen Model Output pen Operations Function /M1 Option Setting the periodic printout interval Section Select the display mode of the bar Select the computation error procedure Channel Limit Value ErrorOver Troubleshooting List of Error MessagesSetting Errors Troubleshooting 10-1 List of Error Messages Operation ErrorsCommunication Errors When the timer expired System Errors Troubleshooting 10-3 Troubleshooting Flow Charts 10-4 Troubleshooting Flow Charts 10-5 10-6 Remaining amount of chart paper MaintenanceMaintenance 11-1 Periodic Inspection Pen Model Cleaning the RecorderCleaning Procedure Dot Model Flexible printed circuit board LED assembly Connector Replacement ProcedureMaintenance 11-3 Replacing the Internal Light LED Required Instruments Calibration ProcedureCalibrating the Recorder RJC of TC input Temperature Measurement When Using a ThermocoupleMaintenance 11-5 11-6 Adjusting the Pen Position Pen ModelBasic=PAdj screen Adjusting Zero and Full Adjusting the Dot Printing Position Dot ModelAdjusting the Hysteresis Maintenance 11-7 Adjusting the Dot Printing Position Dot Model 11-8 Part Name Quantity Period Used Recommended Replacement Periods for Worn PartsMaintenance 11-9 11-10 Recommended Replacement Periods for Worn Parts Dot ModelReplacement Part Name Quantity Period Used Number of Inputs and Scan Interval on the Dot Model Input SpecificationsNumber of Inputs and Scan Interval on the Pen Model Input Type 12-2 Input SpecificationsInput Computation Standard Function Input Type Operating Conditions Alarm Function Specifications Specifications 12-3 Trend Recording Pen Model Recording Function SpecificationsChart Paper Trend Recording Dot Model Printouts Pen Model Recording Function SpecificationsSpecifications 12-5 Printout Dot Model 12-6 Display Function Specifications Display and Displayed Contents 12-8 Display Function SpecificationsItemSpecifications Status Display Description Specifications 12-9 Symbol Description 12-10 Channel digital display Measurement channel Tag display Specifications 12-11Name Display Example DI/DO status display Status display Digital display is the same as 12-12 Specifications 12-13 Specifications of Optional FunctionsAlarm Output Relay /A1, /A2, and /A3 RS-422A/485 Communication Interface /C3 Non-Glare Door Glass /H3 FAIL/Chart End Detection and Output /F1Clamped Input Terminal /H2 Computation Function /M1 Legs Isolated RTD /N2 Specifications 12-15Cu10, Cu25 RTD Input /N1 Expansion Inputs /N3 12-16 Remote Control 5 Points /R1Time When Signal Is Input Procedure Specifications 12-17 General SpecificationsPower Supply Construction Transport and Storage Conditions General SpecificationsIsolation Supported Standards Standard Performance Specifications 12-19Resolution Excludes 12-20 Other SpecificationsEffects of Operating Conditions 220 Dimensional DrawingsSpecifications 12-21 144 151.5 Periodic Printout Scale, recording color, and chart speed Report ModeTime tick and time tick cancel mark Recording color Channel data, alarm, scale printout, and chart speed Scale and chart speed Offset compensation mark, scale, and recording color Printout Using the Tlog Timer /M1 OptionTimer App-4 Time of Recovery Statistical Calculation Operation Operation during Power FailuresProcedure of Handling Over Values during Periodic Printout Special Cases Index Index Index-1 Index Index-2 Index Index-3 7-11 Index-4 WARRANTY/DISCLAIMER Shop online at omega.com