Omega RD100B manual Specifying the Timer Used in Statistical Calculations Tlog, Timer No

9.6 Specifying the Timer Used in Statistical Calculations (TLOG)

Explanation

Timer No.

There are three timers.

Periodic: The timer for determining the periodic printout interval. The computed result is printed every interval, and the computed TLOG value is reset.

1:The timer of timer No. 1. Specify whether the computed value is printed every interval and whether to reset the computed value.

2:The timer of timer No. 2. Specify whether the computed value is printed every interval and whether to reset the computed value.

•Timer operation

The table below shows how each timer operates.

Timer #	Periodic	1 and 2*
Item
Application	Periodic	TLOG computation
Target channel	Measurement and	Computation channels
	computation channels
Timer mode**	Absolute time mode	Absolute or relative time mode
Reset computed TLOG value	Yes	Yes/No selectable
Print when computation	No	Yes
stops

*For the timer 1 and 2 settings, see section 9.12.

**Absolute time mode: Keeps time from the reference time.

Relative time mode: Starts the time in sync with the starting of the computation.

SUM scale

Set the sum scale when using statistical calculation (TLOG.SUM).

For the definition of the term “sum scale,” see page 7-14.

Off:	Simply sums the computed values.
/s:	Sums by converting the computed values to a value over 1 second.
/min:	Sums by converting the computed values to a value over 1 minute.
/h:	Sums by converting the computed values to a value over 1 hour.

/day: Sums by converting the computed values to a value over 1 day.

<Related Topics>

Setting the periodic printout timer: Section 7.8

Setting Timer 1 and Timer 2: Section 9.12

9-14