7.20 Changing the Temperature Unit

This section explains the details of changing the temperature unit on the temperature measurement channels.

Basic Setting mode cannot be entered when recording is in progress or when computation is in progress on models with the computation function (/M1 option).

Procedure

Changing the Settings

1.Hold down the MENU key for 3 seconds to enter Setting mode.

2.Hold down the and keys simultaneously for 3 seconds to enter Basic Setting mode.

3.Press the key or SHIFT + key to select Temperature and then press the key.

4.Set each item and press the key.

Use the key or SHIFT + key to select values.

For the procedure on how to enter values or characters, see section 4.2.

If you press the ESC key in the middle of the operation, the settings entered up to then are cancelled, and the display returns to a higher level menu.

5.When the Setting complete screen appears, do either of the following: To correct the setting, press the key.

If you are done, press the ESC key.

Basic=Temperature

 

Temp=

C

 

 

 

 

Select the temperature unit.

 

 

 

 

 

 

 

The new setting takes effect.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Temperature

 

 

 

 

ESC/? Setting complete

Applying the Changes and Returning to Operation Mode

Press the key or SHIFT + key to select End and then press the key. Press

the key to select Store and then press the key. The changes are applied, and the screen returns to Operation mode. If you select Abort and press the key, the changes are discarded, and the screen returns to Operation mode. Press the ESC key to return to the Basic= screen.

Explanation

Temp (Temperature)

The setting is applied to all temperature measurement channels.

C: Use Celsius.

F: Use Fahrenheit.

7

Setup Operations

for Changing/Adding Functions (Basic Setting Mode)

7-31

Page 154
Image 154
Omega RD100B manual Changing the Temperature Unit, Temp Temperature