Omega RD100B manual Changing the Time Printout Format

7.16 Changing the Time Printout Format

This section explains the details of changing the time printout format of alarm printout, message printout, recording start printout, and new chart speed printout.

Basic Setting mode cannot be entered when recording is in progress or when computation is in progress on models with the computation function (/M1 option).

Procedure

Changing the Settings

1.Hold down the MENU key for 3 seconds to enter Setting mode.

2.Hold down the and keys simultaneously for 3 seconds to enter Basic Setting mode.

3.Press the key or SHIFT + key to select Personalize and then press the key.

4.Press the key or SHIFT + key to select Time print and then press the key.

5.Set each item and press the key.

Use the key or SHIFT + key to select values.

For the procedure on how to enter values or characters, see section 4.2.

If you press the ESC key in the middle of the operation, the settings entered up to then are cancelled, and the display returns to a higher level menu.

6.When the Setting complete screen appears, do either of the following:

To correct the setting, press the key. If you are done, press the ESC key.

7

Setup

Basic=Personalize

Mode=Time print

Alarm=HH:MM

Message=HH:MM

RCD On=HH:MM

C.Speed=HH:MM

Personalize

ESC/? Setting complete

Select the time printout format of the alarm printout.

Select the time printout format of the message printout.

Select the time printout format of the recording start printout.

Select the time printout format of the new chart speed printout.

The new setting takes effect.

Operations for

Changing/Adding Functions (Basic Setting Mode)

Applying the Changes and Returning to Operation Mode

Press the key or SHIFT + key to select End and then press the key. Press

the key to select Store and then press the key. The changes are applied, and the screen returns to Operation mode. If you select Abort and press the key, the changes are discarded, and the screen returns to Operation mode. Press the ESC key to return to the Basic= screen.

7-25