3.7 Printing Measured Values (Manual Printout)

The measured values of all channels are printed.

Procedure

Starting the Manual Printout

1.Press the FUNC key.

2.Press the key to select Print out and then press the key.

Func=Print out

3.Press the key with ManualStart shown on the screen.

Manual printout starts. The screen returns to the data display screen.

Print=ManualStart

Note

When manual printout is executed, trend recording is suspended. However, the recorder continues the measurement and alarm detection (in the background).

When manual printout is complete, trend recording resumes.

If an alarm occurs during the manual printout, the alarm is printed after the trend recording resumes.

Aborting the Manual Printout

The following procedure is for aborting the manual printout that is in progress.

1.Press the FUNC key.

2.Press the key to select Print out and then press the key.

3.Press the key with Manual Stop shown on the screen.

Manual printout stops. The screen returns to the data display screen.

Print=Manual Stop

* When the key or key is pressed while holding down the SHIFT key, the operation is reversed as when the respective key is pressed by itself.

3

Names of

Parts and

Run Operations

3-13

Page 71
Image 71
Omega RD100B manual Printing Measured Values Manual Printout, Starting the Manual Printout, Aborting the Manual Printout