Omega RD100B manual Changing the Settings, Using the ESC Key, Entering Values, Key Operations

4.2 Key Operations

Changing the Settings

Note

The comment line shows useful information such as a description of the setup item and the range of selectable values. Read the comment and change the items as necessary.

The selected item change each time you press the key. The selected item changes

in reverse order if you press the key while holding down the SHIFT key.

SHIFT key + key

Skip

Volt

Mode=TC

RTD

1-5V

key

This manual denotes the operation of pressing a key while holding down the SHIFT key

as SHIFT + the other key (for example: SHIFT + key).

After you make a selection, press the key. The next screen appears.

When the Setting complete screen appears, the changed item is applied.

01-01 Channel Setting complete

Using the ESC Key

If you press the ESC ( MENU ) key, the operation is cancelled, and the display returns to a higher level menu. In other words, if you do not show the Setting Complete screen, the changes you made up to that point are discarded.

Press the ESC ( 1 MENU ) key while holding down the SHIFT ( FEED ) key to show or hide the comment that is displayed at the bottom half of the screen.

Entering Values

Use the key or SHIFT + key to move the cursor. Use the key or SHIFT + key to change a digit value. You repeat these steps to enter the value.

SHIFT key + key

key

Span_L= -2.000 -2.000/ 2.000V

Cursor

8

7key

Span_L= -1.500 -2.000/

4
3	SHIFT key + key
2

When you press the key, the change is applied and the next screen is displayed.

4

Common Operations

for Setting Functions and

Setup Guide

4-3