Setup Operations for Changing the Displayed Contents

Chapter 8 Setup Operations for Changing the Displayed Contents

8.1Key Operations for Changing the Displayed Information

Displaying the Data Display Setup Screen

Hold the 1 MENU key for 3 seconds to show the data display setup screen.

Power ON
Operation mode	Hold down 1	MENU or 3 s to switch.	Data display setup mode
Operation mode			Data display setup mode

The panel keys are set to the functions marked above the keys as shown below.

CHARACTER	ESC/?	SHIFT
RCD MENU DISP	FUNC 1 MENU	FEED CH UP

Returning from the Data Display Setup Screen to Data Display Screen

Hold the 1 MENU key for 3 seconds to return from the data display setup screen to data

display screen.

Note

When the data display setup screen is shown, operations such as measurement, alarm, and

recording continue.

Setup Operations for Changing

the Displayed Contents

8-1

Page 155

Image 155

Contents

User’s Guide For immediate technical or application assistance Electronic Manuals Provided on the Accompanying CD-ROM ForewordTrademarks Revisions Version Suffix Code Added or Modified Functions Reference Recorder’s Version and Functions Described in This ManualRD100B Versions and Functions Software Sold Separately Iii Safety PrecautionsSafety Standards and EMC Standards About This Manual Exemption from Responsibility Handling Precautions of the Software Checking the Contents of the Package Checking the Contents of the Package Standard AccessoriesOptional Accessories Sold Separately Vii Removing the Packing MaterialsPen Model Dot Model Viii How to Use This Manual Conventions Used in This Manual Contents Contents Setup Operations for Convenient Functions Setting Mode Xii Maintenance Overview of the Recorder Input Section Measuring Input Section Square Root Computation Measuring Input Section Delta ComputationScaling Measuring Input Section Bias Burnout Detection of ThermocouplesReference Junction Compensation of Thermocouple Input Filter Pen Model Noise Elimination from Input SignalsMeasuring Input Section Filter and Moving Average Model Integration Time of the A/D Converter Integration Time of the A/D Converter Alarm Types Alarms Alarm Hysteresis Alarms Delay High Limit Alarm TDelay Low Limit Alarm t Delay High Limit Alarm Example T is the specified delay Non-Hold/Hold Operation of the Alarm Indication Alarm IndicationAlarm Recording Alarm Output Relay /A1, /A2, and /A3 Options Channel Approx ms Approx ms Alarms Reflash AlarmAlarm Description Alarms AND/OR Operation of Alarm Output RelaysEnergized/De-energized Operation of Alarm Output Relays Functional Alarms Non-Hold/Hold Operation of Alarm Output Relays Alarm ACK Operation Recording Recording Method Dot Model Chart SpeedTrend Recording Recording Method Pen Model Same time Recording Partial Expanded RecordingPen Offset Compensation Pen Model Compressed Expanded Printout Example on the Pen Model Printout Functional Description Channel Printout Dot Model Only Recording Printout Example on the Dot Model Interval Recording Alarm PrintoutPrintout Contents for details, see appendix Periodic Printout Message Printout New Chart Speed PrintoutRecording Turning ON/OFF the Periodic Printout Manual Printout Printout Example of List on the Pen Model Recording Setting Printout Printout Example of List on the Dot Model Display Types DisplayDisplayed Information Flag Display Alarm Status DisplayDate/Time and Chart Speed Channel Digital + 1 Bar Graph Display Types of Computations Computation Function /M1 OptionComputation Function Channels Dedicated to Computations Assignment of Computation Channels to the Pens Pen Model Handing of the Unit in ComputationsRecording Computation Channels Trend Recording Printout AlarmsDisplay Starting/Stopping Computation Fail Relay Output FAIL/Chart End Detection and Output Function /F1 OptionChart End Output Fail Output Remote Control Function /R1 Option Rising/Falling edge Trigger Level Ms or more Remote Control Function /R1 Option Computation Start/StopComputation Reset Remote Signal Edge, Trigger, and Level Language Temperature UnitOther Functions Key Lock Before Using the Recorder Handling PrecautionsHandling Precautions Installation Location Installation Flat blade Installation ProcedureInstallation Front Contact With each other Panel Cutout External Dimensions of the Recorder Precautions to Be Taken While Wiring Input Signal WiringGeneral Precautions to Be Taken While Wiring Clamped input terminal H2 option Arrangement of the Measuring Input TerminalsMeasuring input terminal block Screw input terminal Recorder Input Signal Wiring Dot ModelBefore Using DC current input +/A Shunt resistor Measuring Input WiringInput Signal Wiring Optional terminal block Optional Terminal WiringArrangement of the Optional Terminals Crimp-on lug with insulation sleeves for 4 mm screws Remote Control Input Terminals Optional Terminal Wiring Relay contact output Voltage-free contact Open collector Wiring ProcedureRelay Contact Output Specifications Relay Contact Input/Transistor Input Specifications Power Supply Specifications Power Supply WiringPrecautions to Be Taken While Wiring the Power Supply Power Supply Wiring Checking the Date/Time Turning ON/OFF the Power Switch Names of Parts Names of PartsFront Names of Parts and Run Operations During normal operation CH UP key Display and Key PanelStatus display Seven keys are available Names Parts Run Operations Rear Panel Stopper Installing or Replacing the Chart PaperLoading the Chart Paper Side with Installing or Replacing the Chart PaperFold chart paper Sprocket teeth Chart holder Feeding the Chart Paper Display and key panel Installing/Replacing Felt Pens or Plotter Pen Pen ModelReplacing Felt Pens Replacing the Plotter Pen Holder tab Installing/Replacing the Ribbon Cassette Dot Model Hole for the ribbon Feed shaft Ribbon feeding knob Installing/Replacing the Ribbon Cassette Dot ModelCassette holder Stopping the Recording Recorded chart paper can be pulled out Front cover tabStarting/Stopping the Recording Starting the Recording Switching the Displayed Channel Using Keys Switching the Display ScreenSwitching the Display Screen Channel Auto Switching Aborting the Manual Printout Printing Measured Values Manual PrintoutStarting the Manual Printout Starting the List Printout Printing the Recorder SettingsStarting the Setup Printout Aborting the Setup Printout Buf.clear=Alarm Clearing the Alarm Printout Buffer Clearing the Message Printout Buffer Displays the preset messagePrinting Messages Printing a Message Resetting the Report Data Resetting the Report Data of the Periodic Printout Alarm Alarm output relay Blinking Alarm indication Releasing the Alarm Output Alarm ACK OperationReleasing the Alarm Output Alarm Output Relay Operation Releasing the Key Lock Activating/Releasing the Key LockActivating the Key Lock Run Modes Exiting from Basic Setting Mode Returning to Operation Mode Entering Setting ModeEntering Basic Setting Mode Exiting from Setting Mode Returning to Operation Mode Key Operations Changing the SettingsUsing the ESC Key Entering Values Copying & Pasting a Character String Entering CharactersInserting Characters Deleting a Character Operation Menus Using the Func Key Operation Mode Menu Structure, Settings, and List of Default Values Exchange Dot Model Menu Structure, Settings, and List of Default Values Menu Structure of Setting Mode POC Menu Structure of Basic Setting Mode Setup Items in Setting Mode and Their Default Values RJC RJC Setup Items in Basic Setting Mode and Their Default Values Remote control function /R1 option Setting initialization NORMAL/MODBUS Normal Description Reference Section Function Setup Guide Recording functions Description Reference Section Function Setup GuideAlarm functions Description Reference Section Recording color Channel numberOr tag Other functions Description Reference Section Display functions Description Reference Section Computed value Timer number TC, RTD, and DC Voltage Setting the Input RangeFrequently Used Setup Operations Setting Mode Input Type Setting the Input rangeSelectable Range of Input Range, Span Left, and Span Right N1 Option Linear Scaling First channel Last channel Delta ComputationSpan Left and Span Right Range Type Selectable Span Values ON/OFF Input Select the right scale value 5V InputScale Left and Scale Right Low-cut To 5.0% of the recording span, 0.1 steps Square Root ComputationLow-cut and Low-cut Point Skip Unused Channels Set the channel range Select Skip New setting takes effect Setting the Alarm Channel Range Setting the AlarmAlarm Type Symbol Name Relay No Difference High Limit Alarm/Difference Low Limit Alarm Setting the Unit on Scaled Channels Mode Changing the Chart SpeedChart speed on the pen model unit mm/h Recorders with Version 1.02 or Earlier Setting the Date/TimeDate/Time New setting takes effect When set to Auto Setting the Trend Recording Interval Dot ModelSetup Operations for Convenient Functions Setting Mode Functions Setting Mode Filter Time Constant Setting the Filter Pen Model Number of Samples of Moving Average Setting the Moving Average Dot ModelNew setting takes effect Zone Setting Recording Zones for Each Channel Zone Recording Expand Setting the Partial Expanded Recording Trend Recording Dot Model Characters That Can Be Used for Tags Setting Tags on Channels Characters That Can Be Used for Messages Setting the Message String See section Duration New setting takes effect Setting the Alarm Delay Duration Internal Light Brightness Setting the Brightness of the Display and Internal LightDisplay Brightness When bias is On Applying a Bias on the Measuring Input Signal Setup Operations For Convenient Functions Setting Mode End month, End day, and End time Start month, Strt day, and Start time DST Changing the Settings Changing the Auxiliary Alarm Function Diagnosis Changing the Auxiliary Alarm Function Behavior Changing the Auxiliary Alarm Function ReflashIndicator Act Integrate Changing the Integration Time of the A/D Converter Burnout Setting the Burnout Detection Function of Thermocouples Setting the RJC Function on Channels Set to TC Input Volt Setting the RJC Function on Channels Set to TC Input Color Changing the Channel Recording Color Dot Model POC Pen Offset Compensation Pen model Turning Printouts ON/OFF Pen Color Printout AlarmCH/Tag Channel Dot Model Periodic Printout Interval Types of Report Data to Be Printed Changing/Adding Functions Basic Setting Mode SUM scale Ref. Time Graph Setting the Bar Graph Display ModeSetup Functions Basic Setting Mode Setting the Key Lock Function Setting the Key Lock Function Operation of Keys to Be Key-Locked Password MovingAVE Enabling the Moving Average Function Dot Model Filter Enabling the Filter Function Pen Model Partial Enabling the Partial Expanded Recording Function Lang Language Changing the Display/Recording Language Procedure 5V low-cut Alarm delaySqrt low-cut Changing the Time Printout Format Speed Changing the Time Printout FormatRCD On ESC/? Initializing the SettingsBasic=Initialize screen Changing the Settings Function to Be Assigned Remote No Date Format Setting Format ExampleChanging the Printout/Display Format of the Date Temp Temperature Changing the Temperature Unit Key Operations for Changing the Displayed Information Setup Operations for Changing the Displayed ContentsDisplaying the Data Display Setup Screen Setup Operations for Changing Displayed Contents End Flag display Data Display Setup MenuKey Operations for Changing the Displayed Information End Assigning Other Display Types See the menu on the previous Changing the Displayed ContentsChanging the Displayed Information Channel Digital Display Stopping the Computation Starting/Stopping/Resetting the ComputationOperations Related to the Computation Function /M1 Option Starting the Computation Setting the Computing Equation Description Character Key Inserting a Character Type Operator Computing EquationOrder of Precedence in Computations Equation Examples Power and Other ComputationsFour Arithmetic Operation Logical Computation Relational Computation Equation Example 01-02OR03.GT.04 XOR Examples of Equations That Are Not Allowed Tlog ComputationEquation Example Characters That Can Be Used for Units Setting the Unit Constant Setting the Constants Used in Equations Select On to set the alarm. When set Alarm Value Specifying the Timer Used in Statistical Calculations Tlog Timer # Periodic Specifying the Timer Used in Statistical Calculations TlogTimer No Timer operation Set the leftmost value of the recording New setting takes effect Related Topics Dot model Set= Math Math= Aux Aux= Tag Duration Basic=Math Math=TimerTLOG Timer No.=1 Mode=Absolute Absolute Time Mode TimersNumber of Timers Timer Type Example TLOG.SUM computation Timer timeout Reset Reset Reset Reset On Reset Off Select the channel Output pen Changing the Channel Assignments of Recording Pens Pen Model Function /M1 Option Operations Setting the periodic printout interval Section Select the display mode of the bar Select the computation error procedure Channel Limit Value ErrorOver Troubleshooting 10-1 List of Error MessagesSetting Errors Troubleshooting When the timer expired Operation ErrorsCommunication Errors List of Error Messages Troubleshooting 10-3 System Errors 10-4 Troubleshooting Flow Charts 10-5 Troubleshooting Flow Charts 10-6 Periodic Inspection MaintenanceMaintenance 11-1 Remaining amount of chart paper Dot Model Cleaning the RecorderCleaning Procedure Pen Model Replacing the Internal Light LED Replacement ProcedureMaintenance 11-3 Flexible printed circuit board LED assembly Connector Required Instruments Calibration ProcedureCalibrating the Recorder RJC of TC input Temperature Measurement When Using a ThermocoupleMaintenance 11-5 11-6 Adjusting the Pen Position Pen ModelBasic=PAdj screen Maintenance 11-7 Adjusting the Dot Printing Position Dot ModelAdjusting the Hysteresis Adjusting Zero and Full 11-8 Adjusting the Dot Printing Position Dot Model Part Name Quantity Period Used Recommended Replacement Periods for Worn PartsMaintenance 11-9 11-10 Recommended Replacement Periods for Worn Parts Dot ModelReplacement Part Name Quantity Period Used Input Type Input SpecificationsNumber of Inputs and Scan Interval on the Pen Model Number of Inputs and Scan Interval on the Dot Model Input Type Operating Conditions Input SpecificationsInput Computation Standard Function 12-2 Specifications 12-3 Alarm Function Specifications Trend Recording Dot Model Recording Function SpecificationsChart Paper Trend Recording Pen Model Printouts Pen Model Recording Function SpecificationsSpecifications 12-5 12-6 Printout Dot Model Display and Displayed Contents Display Function Specifications Status Display Description Display Function SpecificationsItemSpecifications 12-8 Symbol Description Specifications 12-9 12-10 Digital display is the same as Specifications 12-11Name Display Example DI/DO status display Status display Channel digital display Measurement channel Tag display 12-12 RS-422A/485 Communication Interface /C3 Specifications of Optional FunctionsAlarm Output Relay /A1, /A2, and /A3 Specifications 12-13 Computation Function /M1 FAIL/Chart End Detection and Output /F1Clamped Input Terminal /H2 Non-Glare Door Glass /H3 Expansion Inputs /N3 Specifications 12-15Cu10, Cu25 RTD Input /N1 Legs Isolated RTD /N2 12-16 Remote Control 5 Points /R1Time When Signal Is Input Procedure Construction General SpecificationsPower Supply Specifications 12-17 Supported Standards General SpecificationsIsolation Transport and Storage Conditions Excludes Specifications 12-19Resolution Standard Performance 12-20 Other SpecificationsEffects of Operating Conditions 144 151.5 Dimensional DrawingsSpecifications 12-21 220 Periodic Printout Recording color Report ModeTime tick and time tick cancel mark Scale, recording color, and chart speed Scale and chart speed Channel data, alarm, scale printout, and chart speed App-4 Printout Using the Tlog Timer /M1 OptionTimer Offset compensation mark, scale, and recording color Special Cases Operation during Power FailuresProcedure of Handling Over Values during Periodic Printout Time of Recovery Statistical Calculation Operation Index Index-1 Index Index-2 Index 7-11 Index Index-3 Index-4 WARRANTY/DISCLAIMER Shop online at omega.com

Omega RD100B manual Key Operations for Changing the Displayed Information

Models: RD100B

Chapter 8 Setup Operations for Changing the Displayed Contents

8.1Key Operations for Changing the Displayed Information

Displaying the Data Display Setup Screen

Setup Operations for Changing

the Displayed Contents