Omega RD100B Types of Report Data to Be Printed, Changing/Adding Functions Basic Setting Mode

7.8 Setting the Periodic Printout Interval and the Type of Measured Values to Be Printed

Types of Report Data to Be Printed

Changing the Settings

1.Hold down the MENU key for 3 seconds to enter Setting mode.

2.Hold down the and keys simultaneously for 3 seconds to enter Basic Setting mode.

3.Press the key or SHIFT + key to select Print2 and then press the key.

4.Set each item and press the key.

Use the key or SHIFT + key to select values.

For the procedure on how to enter values or characters, see section 4.2.

If you press the ESC key in the middle of the operation, the settings entered up to then are cancelled, and the display returns to a higher level menu.

5.When the Setting complete screen appears, do either of the following: Press the key to set other channels.

If you are done, press the ESC key.

Basic=Print2

CH= 01 -01 Set the channel range.

First channel Last channel

Mode=AVE

SUM scale=Off

Printout2

ESC/? Setting complete

Select the type of report data to print.

Select the sum scale.

The new setting takes effect.

7

Setup Operations for

Applying the Changes and Returning to Operation Mode

Press the key or SHIFT + key to select End and then press the key. Press

the key to select Store and then press the key. The changes are applied, and the screen returns to Operation mode. If you select Abort and press the key, the changes are discarded, and the screen returns to Operation mode. Press the ESC key to return to the Basic= screen.

Changing/Adding Functions (Basic Setting Mode)

7-13