Recording Printout Example on the Dot Model

1.4 Recording

Printout Example on the Dot Model

Manual printout
Nov.09.04		16:00
1	223.5mg/cm3		2		437.2∝S/cm
3 H	591.6˚C		4		−0.222V
5	−0.665V		6 L −0.448V
					New chart speed printout
					_50mm/h*14:55
Periodic printout
Nov.09.04					Time tick
13:50		218.7mg/cm3
1		218.7mg/cm3
2		390.6∝S/cm
3	H	598.4˚C
4	d	−0.222V			Scale
5		−0.995V
6	L −0.448V
0.0					500.0
1CH		Delta computation			mg/cm3
50mm/h_		Delta computation
50mm/h_		Alarm
		Alarm			Buffer overflow mark
		Time tick			Buffer overflow mark
		Time tick
					Alarm printout
					1H3*10:09
					1H3 10:05
					Message printout
				09:52*START#205 ABCDEF
					Recording start printout
Channel printout					_08:00*25mm/h
Channel printout
					Time tick

Functional Description

Channel Printout (Dot Model Only)

Prints the channel No. or tag by the trend recording. The channel No. or tag is printed every approximately 25 mm on the chart paper. The channel printout can be enabled or disabled. By default, the channel printout is enabled.

1-17

Page 31

Image 31

Omega RD100B manual Recording Printout Example on the Dot Model, Functional Description Channel Printout Dot Model Only

Contents

User’s Guide For immediate technical or application assistance Electronic Manuals Provided on the Accompanying CD-ROM ForewordTrademarks Revisions Version Suffix Code Added or Modified Functions Reference Recorder’s Version and Functions Described in This ManualRD100B Versions and Functions Software Sold Separately Iii Safety PrecautionsSafety Standards and EMC Standards About This Manual Exemption from Responsibility Handling Precautions of the Software Checking the Contents of the Package Optional Accessories Sold Separately Standard AccessoriesChecking the Contents of the Package Vii Removing the Packing MaterialsPen Model Dot Model Viii How to Use This Manual Conventions Used in This Manual Contents Contents Setup Operations for Convenient Functions Setting Mode Xii Maintenance Overview of the Recorder Input Section Measuring Input Section Scaling Measuring Input Section Delta ComputationSquare Root Computation Reference Junction Compensation of Thermocouple Input Burnout Detection of ThermocouplesMeasuring Input Section Bias Filter Pen Model Noise Elimination from Input SignalsMeasuring Input Section Filter and Moving Average Model Integration Time of the A/D Converter Integration Time of the A/D Converter Alarm Types Alarms Alarm Hysteresis Alarms Delay High Limit Alarm TDelay Low Limit Alarm t Delay High Limit Alarm Example T is the specified delay Non-Hold/Hold Operation of the Alarm Indication Alarm IndicationAlarm Recording Alarm Output Relay /A1, /A2, and /A3 Options Alarm Alarms Reflash AlarmChannel Approx ms Approx ms Description Alarms AND/OR Operation of Alarm Output RelaysEnergized/De-energized Operation of Alarm Output Relays Functional Alarms Non-Hold/Hold Operation of Alarm Output Relays Alarm ACK Operation Recording Recording Method Dot Model Chart SpeedTrend Recording Recording Method Pen Model Same time Recording Partial Expanded RecordingPen Offset Compensation Pen Model Compressed Expanded Printout Example on the Pen Model Printout Functional Description Channel Printout Dot Model Only Recording Printout Example on the Dot Model Interval Recording Alarm PrintoutPrintout Contents for details, see appendix Periodic Printout Message Printout New Chart Speed PrintoutRecording Turning ON/OFF the Periodic Printout Manual Printout Printout Example of List on the Pen Model Recording Setting Printout Printout Example of List on the Dot Model Displayed Information DisplayDisplay Types Flag Display Alarm Status DisplayDate/Time and Chart Speed Channel Digital + 1 Bar Graph Display Types of Computations Computation Function /M1 OptionComputation Function Channels Dedicated to Computations Assignment of Computation Channels to the Pens Pen Model Handing of the Unit in ComputationsRecording Computation Channels Trend Recording Printout AlarmsDisplay Starting/Stopping Computation Fail Relay Output FAIL/Chart End Detection and Output Function /F1 OptionChart End Output Fail Output Remote Control Function /R1 Option Rising/Falling edge Trigger Level Ms or more Remote Control Function /R1 Option Computation Start/StopComputation Reset Remote Signal Edge, Trigger, and Level Language Temperature UnitOther Functions Key Lock Handling Precautions Handling PrecautionsBefore Using the Recorder Installation Location Installation Flat blade Installation ProcedureInstallation Front Contact With each other Panel Cutout External Dimensions of the Recorder General Precautions to Be Taken While Wiring Input Signal WiringPrecautions to Be Taken While Wiring Clamped input terminal H2 option Arrangement of the Measuring Input TerminalsMeasuring input terminal block Screw input terminal Before Using Input Signal Wiring Dot ModelRecorder Input Signal Wiring Measuring Input WiringDC current input +/A Shunt resistor Optional terminal block Optional Terminal WiringArrangement of the Optional Terminals Crimp-on lug with insulation sleeves for 4 mm screws Remote Control Input Terminals Optional Terminal Wiring Relay contact output Voltage-free contact Open collector Wiring ProcedureRelay Contact Output Specifications Relay Contact Input/Transistor Input Specifications Precautions to Be Taken While Wiring the Power Supply Power Supply WiringPower Supply Specifications Power Supply Wiring Checking the Date/Time Turning ON/OFF the Power Switch Names of Parts Names of PartsFront Names of Parts and Run Operations During normal operation CH UP key Display and Key PanelStatus display Seven keys are available Names Parts Run Operations Rear Panel Loading the Chart Paper Installing or Replacing the Chart PaperStopper Side with Installing or Replacing the Chart PaperFold chart paper Sprocket teeth Chart holder Feeding the Chart Paper Replacing Felt Pens Installing/Replacing Felt Pens or Plotter Pen Pen ModelDisplay and key panel Replacing the Plotter Pen Holder tab Installing/Replacing the Ribbon Cassette Dot Model Cassette holder Installing/Replacing the Ribbon Cassette Dot ModelHole for the ribbon Feed shaft Ribbon feeding knob Stopping the Recording Recorded chart paper can be pulled out Front cover tabStarting/Stopping the Recording Starting the Recording Switching the Displayed Channel Using Keys Switching the Display ScreenSwitching the Display Screen Channel Auto Switching Starting the Manual Printout Printing Measured Values Manual PrintoutAborting the Manual Printout Starting the List Printout Printing the Recorder SettingsStarting the Setup Printout Aborting the Setup Printout Buf.clear=Alarm Clearing the Alarm Printout Buffer Clearing the Message Printout Buffer Displays the preset messagePrinting Messages Printing a Message Resetting the Report Data Resetting the Report Data of the Periodic Printout Alarm Alarm output relay Blinking Alarm indication Releasing the Alarm Output Alarm ACK OperationReleasing the Alarm Output Alarm Output Relay Operation Activating the Key Lock Activating/Releasing the Key LockReleasing the Key Lock Run Modes Exiting from Basic Setting Mode Returning to Operation Mode Entering Setting ModeEntering Basic Setting Mode Exiting from Setting Mode Returning to Operation Mode Key Operations Changing the SettingsUsing the ESC Key Entering Values Copying & Pasting a Character String Entering CharactersInserting Characters Deleting a Character Operation Menus Using the Func Key Operation Mode Menu Structure, Settings, and List of Default Values Exchange Dot Model Menu Structure, Settings, and List of Default Values Menu Structure of Setting Mode POC Menu Structure of Basic Setting Mode Setup Items in Setting Mode and Their Default Values RJC RJC Setup Items in Basic Setting Mode and Their Default Values Remote control function /R1 option Setting initialization NORMAL/MODBUS Normal Description Reference Section Function Setup Guide Alarm functions Description Reference Section Function Setup GuideRecording functions Description Reference Section Or tag Channel numberRecording color Other functions Description Reference Section Display functions Description Reference Section Computed value Timer number Frequently Used Setup Operations Setting Mode Setting the Input RangeTC, RTD, and DC Voltage Input Type Setting the Input rangeSelectable Range of Input Range, Span Left, and Span Right N1 Option Linear Scaling Span Left and Span Right Delta ComputationFirst channel Last channel Range Type Selectable Span Values ON/OFF Input Select the right scale value 5V InputScale Left and Scale Right Low-cut Low-cut and Low-cut Point Square Root ComputationTo 5.0% of the recording span, 0.1 steps Skip Unused Channels Set the channel range Select Skip New setting takes effect Setting the Alarm Channel Range Setting the AlarmAlarm Type Symbol Name Relay No Difference High Limit Alarm/Difference Low Limit Alarm Setting the Unit on Scaled Channels Chart speed on the pen model unit mm/h Changing the Chart SpeedMode Date/Time New setting takes effect Setting the Date/TimeRecorders with Version 1.02 or Earlier When set to Auto Setting the Trend Recording Interval Dot ModelSetup Operations for Convenient Functions Setting Mode Functions Setting Mode Filter Time Constant Setting the Filter Pen Model New setting takes effect Setting the Moving Average Dot ModelNumber of Samples of Moving Average Zone Setting Recording Zones for Each Channel Zone Recording Expand Setting the Partial Expanded Recording Trend Recording Dot Model Characters That Can Be Used for Tags Setting Tags on Channels Characters That Can Be Used for Messages Setting the Message String See section Duration New setting takes effect Setting the Alarm Delay Duration Display Brightness Setting the Brightness of the Display and Internal LightInternal Light Brightness When bias is On Applying a Bias on the Measuring Input Signal Setup Operations For Convenient Functions Setting Mode End month, End day, and End time Start month, Strt day, and Start time DST Changing the Settings Changing the Auxiliary Alarm Function Diagnosis Changing the Auxiliary Alarm Function Behavior Changing the Auxiliary Alarm Function ReflashIndicator Act Integrate Changing the Integration Time of the A/D Converter Burnout Setting the Burnout Detection Function of Thermocouples Setting the RJC Function on Channels Set to TC Input Volt Setting the RJC Function on Channels Set to TC Input Color Changing the Channel Recording Color Dot Model POC Pen Offset Compensation Pen model Turning Printouts ON/OFF Pen Color Printout AlarmCH/Tag Channel Dot Model Periodic Printout Interval Types of Report Data to Be Printed Changing/Adding Functions Basic Setting Mode SUM scale Ref. Time Graph Setting the Bar Graph Display ModeSetup Functions Basic Setting Mode Setting the Key Lock Function Setting the Key Lock Function Operation of Keys to Be Key-Locked Password MovingAVE Enabling the Moving Average Function Dot Model Filter Enabling the Filter Function Pen Model Partial Enabling the Partial Expanded Recording Function Lang Language Changing the Display/Recording Language Procedure Sqrt low-cut Alarm delay5V low-cut Changing the Time Printout Format RCD On Changing the Time Printout FormatSpeed Basic=Initialize screen Initializing the SettingsESC/? Changing the Settings Function to Be Assigned Remote No Changing the Printout/Display Format of the Date Setting Format ExampleDate Format Temp Temperature Changing the Temperature Unit Key Operations for Changing the Displayed Information Setup Operations for Changing the Displayed ContentsDisplaying the Data Display Setup Screen Setup Operations for Changing Displayed Contents End Flag display Data Display Setup MenuKey Operations for Changing the Displayed Information End Assigning Other Display Types See the menu on the previous Changing the Displayed ContentsChanging the Displayed Information Channel Digital Display Stopping the Computation Starting/Stopping/Resetting the ComputationOperations Related to the Computation Function /M1 Option Starting the Computation Setting the Computing Equation Description Character Key Inserting a Character Order of Precedence in Computations Computing EquationType Operator Four Arithmetic Operation Power and Other ComputationsEquation Examples Logical Computation Relational Computation Equation Example 01-02OR03.GT.04 XOR Equation Example Tlog ComputationExamples of Equations That Are Not Allowed Characters That Can Be Used for Units Setting the Unit Constant Setting the Constants Used in Equations Select On to set the alarm. When set Alarm Value Specifying the Timer Used in Statistical Calculations Tlog Timer # Periodic Specifying the Timer Used in Statistical Calculations TlogTimer No Timer operation Set the leftmost value of the recording New setting takes effect Related Topics Dot model Set= Math Math= Aux Aux= Tag Duration Basic=Math Math=TimerTLOG Timer No.=1 Mode=Absolute Absolute Time Mode TimersNumber of Timers Timer Type Example TLOG.SUM computation Timer timeout Reset Reset Reset Reset On Reset Off Select the channel Output pen Changing the Channel Assignments of Recording Pens Pen Model Function /M1 Option Operations Setting the periodic printout interval Section Select the display mode of the bar Select the computation error procedure Over ErrorChannel Limit Value Troubleshooting 10-1 List of Error MessagesSetting Errors Troubleshooting When the timer expired Operation ErrorsCommunication Errors List of Error Messages Troubleshooting 10-3 System Errors 10-4 Troubleshooting Flow Charts 10-5 Troubleshooting Flow Charts 10-6 Periodic Inspection MaintenanceMaintenance 11-1 Remaining amount of chart paper Dot Model Cleaning the RecorderCleaning Procedure Pen Model Replacing the Internal Light LED Replacement ProcedureMaintenance 11-3 Flexible printed circuit board LED assembly Connector Calibrating the Recorder Calibration ProcedureRequired Instruments Maintenance 11-5 Temperature Measurement When Using a ThermocoupleRJC of TC input Basic=PAdj screen Adjusting the Pen Position Pen Model11-6 Maintenance 11-7 Adjusting the Dot Printing Position Dot ModelAdjusting the Hysteresis Adjusting Zero and Full 11-8 Adjusting the Dot Printing Position Dot Model Maintenance 11-9 Recommended Replacement Periods for Worn PartsPart Name Quantity Period Used Replacement Part Name Quantity Period Used Recommended Replacement Periods for Worn Parts Dot Model11-10 Input Type Input SpecificationsNumber of Inputs and Scan Interval on the Pen Model Number of Inputs and Scan Interval on the Dot Model Input Type Operating Conditions Input SpecificationsInput Computation Standard Function 12-2 Specifications 12-3 Alarm Function Specifications Trend Recording Dot Model Recording Function SpecificationsChart Paper Trend Recording Pen Model Specifications 12-5 Recording Function SpecificationsPrintouts Pen Model 12-6 Printout Dot Model Display and Displayed Contents Display Function Specifications Status Display Description Display Function SpecificationsItemSpecifications 12-8 Symbol Description Specifications 12-9 12-10 Digital display is the same as Specifications 12-11Name Display Example DI/DO status display Status display Channel digital display Measurement channel Tag display 12-12 RS-422A/485 Communication Interface /C3 Specifications of Optional FunctionsAlarm Output Relay /A1, /A2, and /A3 Specifications 12-13 Computation Function /M1 FAIL/Chart End Detection and Output /F1Clamped Input Terminal /H2 Non-Glare Door Glass /H3 Expansion Inputs /N3 Specifications 12-15Cu10, Cu25 RTD Input /N1 Legs Isolated RTD /N2 Time When Signal Is Input Procedure Remote Control 5 Points /R112-16 Construction General SpecificationsPower Supply Specifications 12-17 Supported Standards General SpecificationsIsolation Transport and Storage Conditions Excludes Specifications 12-19Resolution Standard Performance Effects of Operating Conditions Other Specifications12-20 144 151.5 Dimensional DrawingsSpecifications 12-21 220 Periodic Printout Recording color Report ModeTime tick and time tick cancel mark Scale, recording color, and chart speed Scale and chart speed Channel data, alarm, scale printout, and chart speed App-4 Printout Using the Tlog Timer /M1 OptionTimer Offset compensation mark, scale, and recording color Special Cases Operation during Power FailuresProcedure of Handling Over Values during Periodic Printout Time of Recovery Statistical Calculation Operation Index Index-1 Index Index-2 Index 7-11 Index Index-3 Index-4 WARRANTY/DISCLAIMER Shop online at omega.com

1.4 Recording

Printout Example on the Dot Model

_08:00*25mm/h

Functional Description

Channel Printout (Dot Model Only)