Omega RD100B manual Basic=Math Math=TimerTLOG Timer No.=1 Mode=Absolute

9.12Setting the Timer Used in TLOG Computation and Periodic Printout

This section explains the details of setting the timer used in TLOG computation and periodic printout.

Basic Setting mode cannot be entered when recording is in progress or when computation is in progress on models with the computation function (/M1 option).

Procedure

Changing the Settings

1.Hold down the MENU key for 3 seconds to enter Setting mode.

2.Hold down the and keys simultaneously for 3 seconds to enter Basic Setting mode.

3.Press the key or SHIFT + key to select Math and then press the key.

4.Press the key with Timer (TLOG) shown on the screen.

5.Set each item and press the key.

Use the key or SHIFT + key to select values.

For the procedure on how to enter values or characters, see section 4.2.

If you press the ESC key in the middle of the operation, the settings entered up to then are cancelled, and the display returns to a higher level menu.

6.When the Setting complete screen appears, do either of the following: To correct the setting, press the key.

If you are done, press the ESC key.

Basic=Math

Math=Timer(TLOG)

Timer No.=1

Mode=Absolute

(When the mode is set to Absolute)

Interval=1h

Select the timer No.

Select the timer type.

Select the timer interval.

(When the mode is set to Absolute)

Ref.Time=00:00

Reset=Off

Print=Off

Set the reference time.

Select On to reset the computed values every interval.

Select On to print the computed values every interval.

ESC/?

Math Timer Setting complete

The new setting takes effect.

9-20