Omega RD100B manual Starting/Stopping/Resetting the Computation, Starting the Computation

Chapter 9 Operations Related to the Computation Function (/M1 Option)

9.1 Starting/Stopping/Resetting the Computation

This section explains the details of starting/stopping the computation and resetting the computed values of computation channels.

Procedure

Starting the Computation

1.Press the FUNC key.

2.Press the key to show Math and then press the key.

3.Press the key with Start shown on the screen.

The computation starts, and the screen switches to the data display screen. The word MATH in the status display comes on.

Math=Start

Stopping the Computation

1.Press the FUNC key.

2.Press the key to show Math and then press the key.

3.Press the key with Stop shown on the screen.

The computation stops, and the screen switches to the data display screen. The word MATH in the status display clears.

Math=Stop

Resetting the Computed Values of All Computation Channels to 0

This operation can be executed only when the computation is stopped.

1.Press the FUNC key.

2.Press the key to show Math and then press the key.

3.Press the key to show Reset and then press the key.

The computed values of all computation channels are reset, and the screen switches to the data display screen.

Math=Reset

* When the key or key is pressed while holding down the SHIFT key, the operation is reversed as when the respective key is pressed by itself.

9

Operations Related to the Computation Function (/M1 Option)

9-1