Omega RD100B manual See section

6.9Setting the Secondary Chart Speed (Remote Control Function, /R1)

This section explains the details of setting the secondary chart speed when the chart speed is to be switched using the remote control function (/R1 option).

Procedure

1.Hold down the MENU key for 3 seconds to enter Setting mode.

2.Press the key or SHIFT + key to select Aux and then press the key.

3.Press the key or SHIFT + key to select Chart2 and then press the key.

4.Set each item and press the key.

Use the key or SHIFT + key to select values.

For the procedure on how to enter values or characters, see section 4.2.

If you press the ESC key in the middle of the operation, the settings entered up to then are cancelled, and the display returns to a higher level menu.

5.When the Setting complete screen appears, do either of the following: To correct the setting, press the key.

If you are done, press the ESC key.

6.Hold down the MENU key for 3 seconds to return to Operation mode.

Set=Aux

Aux=Chart2

mm/h= 20 Set the chart speed.

ESC/?	Chart speed2	The new setting takes effect.
	Setting complete

Explanation

Chart Speed

See section 5.4.

<Related Topics>

Setting the remote control function: Section 7.18

6

Setup Operations

for Convenient Functions (Setting Mode)

6-9