How to Use This Manual

This user’s guide consists of the following sections.

For details on communication functions, see the RD100B/RD1800B Communication

Interface User’s Manual on the CD-ROM.

Chapter Title and Description

1Functional Description

Describes the functions of the RD100B Recorder. Refer to this chapter when you are unsure of the details of the function that you are operating.

2Before Using the Recorder

Describes the installation and wiring procedures.

3Names of Parts and Run Operations

Describes the names of each part of the recorder and the daily operations.

4Common Operations for Setting Functions and Setup Guide

Describes the execution modes of the recorder, basic setup operations using keys, and provides a function setup guide.

5Frequently Used Setup Operations (Setting Mode)

Describes how to change the input range, alarms, chart speed, etc.

6Setup Operations for Convenient Functions (Setting Mode)

Describes the setup operations for convenient functions such as how to assign tags to channels and how to set message strings that are to be printed.

7Setup Operations for Changing/Adding Functions (Basic Setting Mode)

Describes the setup operations for changing or adding functions such as setting the recorder to detect sensor burnouts and changing the contents that are printed on the chart paper.

8Setup Operations for Changing the Displayed Contents

Describes how to select the display type suitable for the application.

9Operations Related to the Computation Function (/M1 Option)

Describes all operations related to the computation function.

10Troubleshooting

Describes error message and troubleshooting measures of the RD100B Recorder.

11Maintenance

Describes periodic inspection, calibration, pen adjustment/printer carriage adjustment, and recommended replacement period for worn parts.

12Specifications

Gives the specifications of the RD100B Recorder.

Appendix Describes the printout contents.

Index

Note

This user’s manual covers information regarding the recorders with English as the display/ recording language (suffix code “2”).

For the procedure of setting the display/recording language, see section 7.14, “Changing the Display/Recording Language.”

viii

Page 10
Image 10
Omega RD100B manual How to Use This Manual, Viii