Omega RD100B manual Display and Key Panel, Status display, Seven keys are available

3.1 Names of Parts

Display and Key Panel

Status display

Displays the following information.

RECORD Illuminates while recording measured values.

KEY LOCK Illuminates when key lock is enabled.

MATH Illuminates when computation on the computation function (/M1 option) is in progress.

CHART END Illuminates when the chart paper is out (/F1 option). ALARM 1 to 6 Illuminates when an alarm is occurring on channels 1 to 6.

Main display

Displays the measured values. Also, displays the setup screen when setting functions.

RECORD	KEY LOCK	MATH	CHART END	ALARM	1 2 3 4 5 6
	CHARACTER			ESC/?	SHIFT
RCD	MENU	DISP	FUNC	1 MENU	FEED CH UP

Seven keys are available.

For all keys except RCD, functions marked above the keys are enabled when setting functions or when the FUNC key or the DISP MENU key is pressed.

<While setting functions, when the FUNC key/DISP MENU key is pressed>

CHARACTER Key: Changes the character type when entering a character. Press this key while holding down the SHIFT key to switch the character type in reverse order.

UP/DOWN Key: Switches the setup item or the value.

Press this key while holding down the SHIFT key to switch the setup item or the value in reverse order.

LEFT/RIGHT Key: Moves the cursor to the right when entering a value or character. Press this key while holding down the SHIFT key to move the cursor to the left..

ESC Key: Cancels the operation.

When pressed with the SHIFT key, the display of the comment on the setting turns ON/OFF.

SHIFT Key: Used with the key, key, or the

CHARACTER key.

ENTER Key: Confirms the setup item or value.

CHARACTER	ESC/?	SHIFT
RCD MENU DISP	FUNC 1 MENU	FEED CH UP

<During normal operation>

CH UP key

Switches the displayed channel. (when manual switching is specified)

FEED key

Feeds the chart paper.

DISP MENU key

Hold this key down for 3 seconds to switch to the data display setup screen. Hold this key down for 3 seconds also to exit from the data display setup screen.

FUNC key

Used when executing manual printout, message printout, etc.

DISP key

Switches the screen in the main display.

MENU key

Hold this key down for 3 seconds to enter Setting mode. Hold this key down for 3 seconds also to exit from Setting mode.

RCD key

Starts/stops recording.

Note

This manual denotes the operation of pressing a key while holding down the SHIFT key as

SHIFT + the other key (for example: SHIFT + key).

3-2