Omega RD100B manual Setting the Unit, Characters That Can Be Used for Units

9.3 Setting the Unit

This section explains the details of setting the unit on computation channels.

Procedure

1.Hold down the MENU key for 3 seconds to enter Setting mode.

2.Press the key or SHIFT + key to select Math and then press the key.

3.Press the key or SHIFT + key to select Unit and then press the key.

4.Set each item and press the key.

Use the key or SHIFT + key to select values.

For the procedure on how to enter values or characters, see section 4.2.

If you press the ESC key in the middle of the operation, the settings entered up to then are cancelled, and the display returns to a higher level menu.

5.When the Setting complete screen appears, do either of the following: Press the key to set other channels.

If you are done, press the ESC key.

6.Hold down the MENU key for 3 seconds to return to Operation mode.

Set=Math
	Math=			Unit
							Set the channel range.
			CH=		0A	-0A
		First channel Last channel					Set the unit.
			Unit=

ESC/?	0A-0A Channel	The new setting takes effect.
	Setting complete

Explanation

Characters That Can Be Used for Units

Set the unit using up to 6 characters.

The available characters are as follows:

Alphabet, numbers, symbols (%, #, °, @, +, –, *, /, (, ), ∝, Ω, 2, 3, .), and space

9

Operations Related to the Computation Function (/M1 Option)

9-9