Chapter 4 Common Operations for Setting Functions and Setup Guide

4.1 Run Modes

The recorder has three run modes.

Operation Mode

This mode is used for normal recording operation. The recorder enters this mode when the power is turned ON. The operations that can be carried out in this mode are described in chapter 3. The details on the data display setup screen are explained in chapter 8.

Setting Mode

This mode is used to set the input range, alarms, chart speed, and other parameters. These settings can be changed while recording is in progress. However, the input range of measurement channels and the computing equation, unit, constant, and TLOG setting of computation channels cannot be changed while computation (/M1 option) is in progress. The operations that can be carried out in this mode are described in chapter 5 and 6.

Basic Setting Mode

This mode is used to set the basic specifications of the recorder such as the thermocouple burnout detection function and the alarm output relay operation. This mode cannot be entered while the recorder is recording or while computation is in progress on the computation function (/M1 option). Measurement, recording, and alarm detection cannot be carried out in this mode. The operations that can be carried out in this mode are described in chapter 7.

Power ON

Display “End=Store” and press

Operation mode

Setting mode

 

Basic Setting mode

Hold down 1 MENU for 3 s

 

 

Data display setup screen

 

 

 

Hold down

Hold down

 

MENU for 3 s

+

for 3 s

4

Common Operations

for Setting Functions and

Setup Guide

4-1

Page 78
Image 78
Omega RD100B manual Run Modes