Omega RD100B manual Resetting the Report Data of the Periodic Printout

3.11Resetting the Report Data of the Periodic Printout

This operation resets the past report data when the recorder is configured to print the report data (the average, the minimum, the maximum, or the sum) of the measured values in periodic printout.

Procedure

Resetting the Report Data

1.Press the FUNC key.

2.Press the key to select Periodic and then press the key.

Func=Periodic

3.Press the key to select Reset and then press the key.

The report data is reset, and the calculation of the report data starts again from that point. The screen returns to the data display screen.

Log data=Reset

* When the key or key is pressed while holding down the SHIFT key, the operation is reversed as when the respective key is pressed by itself.

3

Names of

Parts and

Run Operations

3-17