Omega RD100B manual Select the display mode of the bar

9.16 Setting the Bar Graph Display Mode

This section explains the details of setting the bar graph display mode.

Basic Setting mode cannot be entered when recording is in progress or when computation is in progress on models with the computation function (/M1 option).

Procedure

Changing the Settings

1.Hold down the MENU key for 3 seconds to enter Setting mode.

2.Hold down the and keys simultaneously for 3 seconds to enter Basic ¥U‘ting mode.

3.Press the key or SHIFT + key to select Math and then press the key.

4.Press the key or SHIFT + key to select Bar graph and then press the key.

5.Set each item and press the key.

Use the key or SHIFT + key to select values.

For the procedure on how to enter values or characters, see section 4.2.

If you press the ESC key in the middle of the operation, the settings entered up to then are cancelled, and the display returns to a higher level menu.

6.When the Setting complete screen appears, do either of the following: Press the key to set other channels.

If you are done, press the ESC key.

Basic=					Math
	Math=			Bar graph
								Set the channel range.
			CH=			0A-0A
		First channel Last channel						Select the display mode of the bar
			Graph=				Normal
								graph.

	0A-0A Channel	The new setting takes effect.
ESC/?	Setting complete

Applying the Changes and Returning to Operation Mode

Press the key or SHIFT + key to select End and then press the key. Press

the key to select Store and then press the key. The changes are applied, and the screen returns to Operation mode. If you select Abort and press the key, the changes are discarded, and the screen returns to Operation mode. Press the ESC key to return to the Basic= screen.

Explanation

Graph

Normal: Sets the base point of the bar graph to the left or right of the recording span whichever is smaller in value.

Center: Sets the base point of the bar graph to the 50% position of the recording span.

9-27

9

Operations Related to the Computation Function (/M1 Option)