Omega RD100B manual Key Operations, Entering Setting Mode, Entering Basic Setting Mode

4.2 Key Operations

This section describes basic operations on the panel keys to change various settings. Functions are set in Setting mode or Basic Setting mode.

Entering Setting Mode

Hold down the MENU key for 3 seconds.

The Setting mode display appears. The top and bottom lines are the setup item and comment, respectively.

The section that is blinking in the setup item that you change. In this manual, the section that you change appears shaded.

Setup item Set=Range The item to be controlled blinks.

Comment Input range and

The panel keys are set to the functions marked above the keys.

CHARACTER	ESC/?	SHIFT
RCD MENU DISP	FUNC 1 MENU	FEED CH UP

Exiting from Setting Mode (Returning to Operation Mode)

Hold down the MENU key for 3 seconds.

The screen returns to operation mode.

Entering Basic Setting Mode

Basic Setting mode is entered from Setting mode.

Hold down the MENU key for 3 seconds to enter Setting mode. Next, hold down both the ( DISP ) key and the (FUNC ) key for 3 seconds.

The Basic Setting mode display appears. The top and bottom lines are the setup item and comment, respectively.

The section that is blinking in the setup item that you change. In this manual, the section that you change appears shaded.

Setup item Comment

Basic=Alarm The item to be controlled blinks. Auxiliary alarm

Exiting from Basic Setting Mode (Returning to Operation Mode)

This operation is used to return to Operation mode after changing the settings in Basic Setting mode.

Press the ESC key several times to return to the Basic= screen.

Press the key or SHIFT + key to select End and then press the key. The setup save screen appears.

Basic=End

Save Settings

Press the key to select Store and then press the key. The setting is applied, and the screen returns to Operation mode. If you select Abort and press the key, the setting is discarded, and the screen returns to Operation mode.

End=Store

Save settings and

4-2