JVC GVT0142-001A Playing discs, Playback, Audio, Press 0OPEN/CLOSE to open the disc, • Press

Playing discs

Playback

(Refer to page 17 for playing MP3/WMA and JPEG.)

page 5

Place a disc with the label side facing up.

•Place an 8 cm (31/8 inches) disc in to the hollow part in the center.

	1 Press	AUDIO.
	• The power will be turned on and the STANDBY
	lamp will go off.
	• Press	AUDIO again to turn off the power.
2	Press 0OPEN/CLOSE to open the disc
	tray to load a disc.
3	Press DVD/CD 3.
	The disc tray will close and playback will start.

•The power will be turned on when any of PLAY 3, FM, AM, AUX, or 0 on the main unit and DVD/CD 3, FM, AM, AUX, or 0OPEN/CLOSE on the remote control is pressed while the power is off.

If any button other than 0 or 0OPEN/CLOSE is pressed, the source will also be changed (if there is a disc loaded, playback will start).

NOTE

•A menu screen may be displayed on the TV after starting playback of a DVD/VCD/SVCD. In this case, select a desired item to playback by using the following buttons on the remote control.

•Select a desired item using cursor 5/3/∞/2 and press ENTER.

•Select a desired item using the number buttons.

•Depending on the disc, actual operation may be different from the description.

Screens displayed on the TV when the power is turned ON.

		The following messages appear depending on the status of the system.
		(When FM, AM or AUX is selected as a source, the messages do not appear.)
	NOW READING		Appears when the system is reading the disc information. Wait for a while.
	REGION CODE		Appears when the Region Code of the DVD VIDEO does not match the code
	ERROR!		the system supports. (page 3)
	NO DISC		Appears when no disc is loaded.
	OPEN		Appears when opening the disc tray.
	CLOSE		Appears when closing the disc tray.
	CANNOT PLAY THIS		Appears when trying to play back an unplayable disc.
	DISC
12