Ringdale ISDN user manual Setup OverLAN Commander for Windows, Introduction

CONFIGURING YOUR ROUTER

Setup: OverLAN Commander for Windows 3.xx

Introduction

OverLAN Commander is available on a 3.5-inch floppy disk included with your Ethernet/ISDN router package.

To use OverLAN Commander 16/IPX for configuring your router, you will need a computer (preferably equipped with a mouse) running Microsoft Windows (version 3.11 or greater). The computer must be connected to your Ethernet network.

You should be familiar with using Microsoft Windows. If not, please refer to the manual for that product.

There are three dialog buttons you should be familiar with before using OverLAN Commander.

Common buttons:

for helpful hints and instructions

to quit the current dialog box and leave all settings unchanged

to quit the current dialog box and record all changes made

73