Ringdale ISDN user manual Prompt, Call Type By Command

	CONFIGURING WITH A LOCAL CONSOLE
The prompt
Call Type	: [By Command]

will appear beneath the previous prompt.

The default of Call Type is By Command. Pressing the spacebar switches between the available settings.

Choices:

•By Command is used when you want calls to be manually placed. In this setup, the router cannot place calls automatically.

•On Demand instructs the router to place calls automatically when data is received for the remote network. When On Demand is selected, Bandwidth on Demand is automatically enabled (if PPP Multilink is enabled).

•When one or both B-channels are selected as Permanent Channels, then the selected channel(s) will remain open all of the time. If an error causes a disconnection, the router will automatically redial the number and raise the line up again.

When only B1 or B2is a permanent channel (unless you also have PPP Multilink and Bandwidth on Demand enabled), then any calls or hangups on the remaining (nonpermanent) B-channel must be performed manually.

Press the Enter key when you are ready to continue.

109