Ringdale ISDN user manual Line Idle Detection, Following message will appear

CONFIGURING WITH A LOCAL CONSOLE

The prompt

Line Idle Detection :

will appear.

Select this option if the device being called is an OverLAN router (or another type of device that is compatible with Line Idle Detection). This option allows the router to detect certain disruptions in the communications link with the remote device and hang-up. If you are not sure whether the remote device supports Line Idle Detection, disable this option.

Choices:

•Enable this option.

•Disable this option.

Press the Enter key when you are ready to continue.

The following message will appear:

Is the above setup information correct? (y/n) -

Type n to start over with this section.

Type y to use the current settings. While the settings will be used by the router, they are not actually saved. To save the settings, you must select SAVE from the command prompt of the OverLAN Operating System.

You may now go to Task 4.

120