Ringdale ISDN user manual Getting Started

Getting Started

The following items are included in the OverLAN router package:

•The Ethernet/ISDN router,

•An RJ11 - DB25 communications cable,

•An unshielded RJ45 ISDN cable,

•The power cord,

•A 10BASE-2 T-connector,

•3.5 inch disk(s) for OverLAN Commander,

•This manual and a warranty return card.

Before starting to setup the router, you need the following:

•A fully operating Ethernet using TCP/IP and/or Novell Netware,

•An NT-1,

•A shielded RJ45 Ethernet cable,

•An ISDN BRI line -- you will need to know the ISDN phone number(s) and SPID (only required in the USA) number(s),

•A 9DB - DB25 pin adaptor if you have a computer with a 9-pin serial port,

•A computer running Microsoft Windows (version 3.11 or greater), or optionally an ASCII terminal or a computer running terminal software.

No additional tools are needed to install your router.

5