CONFIGURING WITH A LOCAL CONSOLE |
|
The Prompt |
|
Address Assignment | : |
may appear beneath the previous prompt.
This option only appears if PPP IP Assignment is set to Assigned. This is the IP address to assign to remote devices.
Choices:
•Type an IP Address to assign to devices calling in. An IP Address should be of the form xxx.xxx.xxx.xxx where each
xxxis in the range of 1 to 256.
•Do one of the following:
•Leave this feature unchanged by not typing anything.
•Erase the current address with the back space key and type a new IP address.
Note: This feature has a default value of 000.000.000.000 which is not a valid IP address. If you leave this value unchanged, devices calling in will not gain access to the router.
Press the Enter key when you are ready to continue.
The following message will appear:
Is the above setup information correct? (y/n) -
Type n to start over with this section.
Type y to use the current settings. While the settings will be used by the router, they are not actually saved. To save the settings, you must select SAVE from the command prompt of the OverLAN Operating System.
You may now go to Task 5.
130