CONFIGURING YOUR ROUTER

When Bridge is on, indicated by next to Bridge, you can setup your router to act as a bridge between two physical networks.

To configure Bridging, use the mouse and click on

The Bridge Setup dialog box is shown below:

Bridge Setup dialog box

The filters only work for Ethernet II frame types. Other frame types such as Ethernet 802.3 cannot use the filters, but the router can still act as a bridge. It just will not be able to use filters in that situation. Choose any of the filters individually or in combination.

Choices:

Filter IPX prevents IPX packets from crossing the bridge.

Filter IP prevents IP packets from crossing the bridge.

88

Page 88
Image 88
Ringdale ISDN user manual Choices