INSTALLING the OverLAN ROUTER

Task 2: Connect your router to a computer (running terminal software) or to an ASCII terminal.

In this task, you will configure the router from a local console port. However, you may skip this task and configure the router using OverLAN Commander from a Windows PC on the Ethernet.

Step 1:

Connect the supplied 9-pin end of an RS-232communications cable.

Communications (Serial) Port

Back of Router

 

Reset

10baseT

10base2

BRI Port

Power

(ISDN Line)

RS-232 cable

 

 

 

 

 

(ex. RJ-11 to DB9-25)

 

Computer or

ASCII terminal

Figure 4

Step 2:

Connect the other end of the cable into the COM port of a computer (running terminal software) or to an ASCII terminal -- see figure 4. If you are using the included RJ-11-to-DB25 cable, a 25-9 pin adaptor may be needed for the 25-pin end of the cable, if your computer has only a 9-pin port.

This completes Task 2.

9

Page 9
Image 9
Ringdale ISDN user manual Reset 10baseT 10base2