CONFIGURING YOUR ROUTER

Task 2: Select the Unit Information

Step 1: Select a Unit Name

From the Setup dialog box

Unit Name appears under Unit Information, shown above. This is the router name that appears in the OverLAN Commander main menu. If more than one router is installed, the name should reflect the location of the router or the networks it is connecting. No two routers should have the same name.

Unit Name should already have a default name. If you want to keep this name then you can go to Step 2.

Otherwise, erase the default Unit Name and type in a new name of up to 10 letters and/or numbers.

You have set the Unit Name.

Step 2: Select a Console Password.

Console Password appears under Unit Information, above. It is used to protect your configuration settings.

77

Page 77
Image 77
Ringdale ISDN user manual Task 2 Select the Unit Information, Select a Unit Name, Select a Console Password