CONFIGURING YOUR ROUTER
METHOD 1: OverLAN Setup Wizard
Introduction
The OverLAN Setup Wizard is included in Version 1.45 and later of OverLAN Commander 32/IP. To access the OverLAN Setup Wizard, you must first install OverLAN Commander 32/IP on a Windows 95/NT system with the TCP/IP stack enabled.
To install OverLAN Commander 32/IP, do the following:
Step 1:
You should have two floppy disks for OverLAN Commander. Insert Disk 1 into floppy drive A: of your Windows 95/NT computer.
Step 2:
Exit all applications currently open (or running) in Windows.
Step 3:
From Windows, select Start > Run and then run
A:\setup.exe.
Step 4:
Follow all of the online instructions for installing OverLAN Commander.
When the installation of OverLAN Commander is complete, you are ready to run the application.
Run OverLAN Commander
From Windows, select Start > Programs > OverLAN Commander > Commander. The OverLAN Commander splash screen should appear followed by the OverLAN Commander window (shown on the next page).
15