Pelco C2631M-A SETTING UP THE TIME PERIOD

C2631M-A (6/07) Client Application 169
7. Enter the following server settings if necessary:
• Server address (This address should be the same as the SMTP server address you entered above.)
•User name
• Password
8. Click Test E-mail Notification.
Figure 146. E-Mail Test
SETTING UP THE TIME PERIOD
The DX8100 can be configured to send e-mail notifications on a periodic basis, such as once every ten minutes. This sections describes how to
set up the time period and includes the following topics:
•Configuring E-Mail Notification Frequency
•Setting the Time of Day
•Sending E-mail Notifications in Response to Motion Events
•Sending E-mail Notifications in Response to Alarm Events
•Sending E-mail Notifications in Response to Video Loss Events
Configuring E-Mail Notification Frequency
Depending on the volume of motion, alarm, or video loss events detected by the DX8100, the number of e-mail notifications can be far too many
to manage effectively. To keep the number of e-mails sent by the DX8100 at a manageable level, the e-mail notification frequency can be
adjusted. When events have been detected, e-mail notifications can be sent out in intervals from once per minute up to once every six hours. If
no events have been detected during the specified frequency interval, no notification will be sent. Each e-mail notification will include
information about the first event detected during the interval, the last event detected during the interval, and a still image (in JPEG format) of the
last event.
To configure notification frequency:
1. On the DX8100 toolbar, click . The Setup dialog box opens to the Camera page.
2. Click . The Notification page is display.
3. Click the Emergency E-mail Notification Setup tab.




