Pelco C2631M-A manual PTZ Patterns, Clearing a Preset

Clearing a Preset

To clear a preset:

1.Click to enter programming mode.

2.Click the number of the preset you want to clear from the PTZ keypad.

3.Click .

4.Repeat steps 2 and 3 to clear multiple presets.

5.Click to exit programming mode.

￿

￿

￿

Figure 247. Clearing a Preset Using Web Client

PTZ PATTERNS

A pattern is a user-defined, viewable camera path with a definite beginning and end. Patterns are made up of a sequence of standard pan/tilt, and lens commands. Patterns are stored in the internal memory of the PTZ device, such as a Spectra dome, that is connected to the DX8100. Depending on the type and configuration of the PTZ device, the DX8100 can address up to four unique PTZ patterns. Once defined, a pattern can be activated with a series of on-screen commands. A pattern will run continuously until it is deactivated.

Only PTZ-enabled cameras that support pattern programming through Pelco D, P, or Coaxitron protocols can use this feature.

This section describes how to work with patterns and includes the following topics:

•Programming a Pattern

•Activating a Pattern

•Clearing a Pattern

•Accessing Programming Features of Remote Cameras

C2631M-A (6/07) DX8100 Web Client 235