Pelco C2631M-A Adding a DX8100 Site with a Unknown IP Address

222 DX8100 Web Client C2631M-A (6/07)
5. If necessary enter a new base port number (9002 is the default).
Consult your network administrator before assigning or changing port numbers. Make sure that the ports are not blocked internally, but are
protected from external threats by a firewall. Web client and server ports must be identical.
6. If necessary, enter a software upgrade port number (9003 is the default).
7. If necessary, enter a new information port in the Information Port box (9005 is the default).
8. Click OK. The site appears in the Connection List.
Adding a DX8100 Site with a Unknown IP Address
To add a remote DVR site to the Connection List when you do not know the IP address:
NOTES: To be successful, the following stipulations must be satisfied:
• Each DVR must be attached to the same subnet.
• The first three octets of the IP address of the subnet must be known.
• The range of addresses used in the last octet of the subnet must be known.
1. Click . The Connection List dialog box opens.
Figure 225. Connection List Dialog Box
2. Click DX8100 Scan. The DX8100 Scan dialog box appears.
Figure 226. DX8100 Scan Dialog Box