Pelco C2631M-A manual ,

68 Client Application C2631M-A (6/07)
ACTIVATING A PRESET TOUR
This section describes how to activate a preset tour. You can save a preset tour for later use without engaging the tour by not performing step 5.
Then, continue on to step 6 without clicking Apply.
To activate a preset tour:
1. On the DX8100 toolbar, click .
2. Click and then to bring up the "Preset preset tour group" dialog box.
3. From the drop-down box, select the preset tour (1-4) you want to activate.
4. Click Save.
5. Click Apply.
6. Click Exit to return to the main screen.
7. Click on the PTZ keypad to exit programming mode.
8. Click on the PTZ keypad to activate the tour.
Figure 49. Activating a Preset Tour
To reactivate the last preset tour you configured:
• On the keypad, click Preset.
DEACTIVATING A PRESET TOUR
To deactivate a preset tour, do one of the following:
• Use the mouse to move the on-screen PTZ control.
• Activate a PTZ preset.


