Pelco C2631M-A manual Setting the Resolution and Frame Rate, Frame Rate Configuration Dialog Box

6.Repeat step 5b for each camera you want to configure.

7.Click OK.

8.Click Apply at the Schedule page.

Figure 124. Frame Rate Configuration Dialog Box

Setting the Resolution and Frame Rate

Both resolution and frame rate settings can be adjusted using the Frame Rate Configuration dialog box. For information on accessing the Frame Rate Configuration dialog box, refer to Accessing the Frame Rate Configuration Dialog Box.

To set recording resolution and frame rates for each channel:

1. On the DX8100 toolbar, click . The Setup dialog box opens to the Camera page.

2. In the Setup dialog box, click . The Schedule page is displayed.

3.In the Camera Settings section, click Frame Rate Configuration. The Frame Rate Configuration dialog box opens.

4.Select the button for the recording resolution and mode you want to configure. Options are as follows:

•640

•704

•Normal

•Motion

•Alarm

•ATM/POS

The 640 resolution setting is for the standard VGA format. The 704 resolution is for the cropped D1 video (NTSC, PAL).

5.Select resolution values for individual channels from the drop-down boxes. The following table describes the available resolution values.

Setting a resolution value for one recording mode sets the resolution value for all modes. For example, setting resolution to 640 x 480 in Motion recording mode will change the resolution to 640 x 480 in Normal and Alarm recording modes as well.

142 Client Application C2631M-A (6/07)