Pelco C2631M-A - page 25

C2631M-A (6/07) Client Application 25
7. Click OK. The site appears in the Connection List.
Figure 13. Server Information Dialog Box
ADDING A SITE WITH AN UNKNOWN IP ADDRESS
This section describes how to add a site with an unknown IP address. To be successful, the following stipulations must be satisfied:
• Each DVR must be attached to the same subnet.
• The first three octets of the IP address of the subnet must be known.
• The range of addresses used in the last octet of the subnet must be known.
NOTE: The DX8100 scan process running on the PC takes much longer than the scan process does running on the DX8100 server.
To add a remote DVR site to the Connection List when you do not know the IP address of the site:
1. On the DX8100 toolbar, click . The Connection List dialog box opens.
2. Click DX8100 Scan. The DX8100 Scan dialog box opens.
3. Enter an IP address range to search for DVR sites.
a. Enter the first three octets of the IP range you wish to search; for example, 10.10.1.
b. Enter the beginning value for the search range in the fourth octet; for example, 001.
c. Enter the final value for the search range in the text box provided; for example, 254. Each octet of the IP address must be an integer
between 1 and 255.
4. Click Find.
5. Select one or more DX8100 servers to add to the site tree.
6. Click Add. The site appears in the Connection List.
w
x
y
U
V