Pelco C2631M-A manual Exporting Video, Exporting Bookmarked Video Regions, Creating Bookmarks

Exporting Video

Power Users and Administrators can export sections of prerecorded video to a local hard disk drive or other device attached to a client PC. The following instructions demonstrate how to export video.

•You must put the recorder in Playback or Search mode to export video. You cannot access Export in Live mode.

•To export video or still images to a CD-R/RW or DVD-R/RW, you must have Nero Express CD burning software version 6.3.1.25 installed on your client PC. If you do not have this version of Nero Express, you can download an update or demo version at www.nero.com.

This section describes how to export video and includes the following topics:

•Exporting Bookmarked Video Regions

•Inserting and Removing a USB Flash Drive

•Enabling the Deinterlacing Filter

•Mapping and Disconnecting a Network Drive

•Performing the Export

•Stopping an Export While in Process

EXPORTING BOOKMARKED VIDEO REGIONS

You can bookmark multiple regions of video along the timeline for export. Bookmarked regions are designated with start point and end point bookmarks. Multiple regions can be bookmarked along a single 24-hour timeline, but only a single channel can be exported at a time. Bookmarked regions are listed in the Export Video dialog box at the time of export.

The following figure shows the DX8100 bookmark controls.

Figure 73. Bookmark Controls

The following table describes the bookmark controls.

		Table X. Bookmark Controls
Button	Command	Description
	Add Bookmark	Does the following:
		• Adds a red bookmark flag to mark the beginning of a start point.
		• Adds a gray bar to indicate the range between the start point and end point.
	Remove Bookmark	Removes the selected bookmark.
	Remove All	Removes all bookmarks.
	Bookmarks

CREATING BOOKMARKS

To select a region to export:

1.Make sure the DVR is in Playback or Search mode by clicking or .

2.Click if you are in Live mode, or proceed to step 3 if you are in Search mode.

3.Select a camera from the Site tree.

4.Locate the timeline slider at the beginning of the range you want to bookmark.

You can use the drop-down box and spinner buttons above the timeline to locate a bookmark.

96 Client Application C2631M-A (6/07)