Pelco C2631M-A manual Setting UP Network Properties

5.Configure each relay that is linked to an alarm:

a.Click the drop-down box to select a relay.

b.Select a relay time value from the Activation Period drop-down box.

￿5a

5b

Figure 133. Linking Relays to Video Loss

The following table describes the available options.

	Table AL. Video Loss-Activated Relay Settings
Option	Result
Disable	Relay will not activate when a video loss event occurs.
Follow Event	Relay will activate at the exact moment the video loss event happens.
1, 3, 5, 10,15, and 20 Seconds	Sets the amount of time the relay will remain active after the video loss event occurs.

SETTING UP NETWORK PROPERTIES

Network settings cannot be changed from the DX8100 Client application. To change a DVR’s network configuration, you must physically log in to a local DX8100 Series DVR as an Administrator or Power User. For more information on configuring the DX8100’s network settings, refer to DX8100 DVR Online Help or the Operation and Programming manual that came with your unit.

150 Client Application C2631M-A (6/07)