Pelco C2631M-A manual Linking Cameras to Record in Response to Motion Events

Linking Cameras to Record in Response to Motion Events

To link multiple cameras to record in response to motion detection events:

1.On the DX8100 toolbar, click . The Setup dialog box opens to the Camera page.

2.Click . The Linking page is displayed.

3.Click the Event-Recording Link Settings tab.

4.In the Motion Record Link Settings section, do the following:

a.Select a camera from the Motion Source Camera drop-down box.

b.Click the button for each camera you want to begin recording when motion is detected by the source camera.

5.Click Apply.

4a

4b

Figure 103. Event-Relay Link Settings: Video-Loss Link Settings Section

Linking Cameras to Record in Response to Alarm Events

To link multiple cameras to record in response to a single alarm input:

1.On the DX8100 toolbar, click . The Setup dialog box opens to the Camera page.

2.Click . The Linking page is displayed.

3.Click the Event-Recording Link Settings tab.

4.In the Alarm Record Link Settings section, do the following:

a.Select an Alarm channel from the Alarm Channel drop-down box.

b.Click the button for each camera you want to begin recording when the source alarm is triggered.

5.Click Apply.

4a

4b

Figure 104. Event-Recording Link Settings: Alarm Record Link Settings Section

Linking Cameras to Record in Response to ATM/POS Events

To link multiple cameras to record in response to an ATM/POS event:

1.On the DX8100 toolbar, click . The Setup dialog box opens to the Camera page.

2.Click . The Linking page is displayed.

C2631M-A (6/07) Client Application 123