Pelco C2631M-A manual Linking Cameras to Record in Response to External Events

4.In the ATM/POS Link Settings section, do the following:

a.Select an ATM/POS address from the ATM/POS Address drop-down box.

b.Click the button for each relay you want to link to the selected ATM/POS address.

You can also drag relays onto ATM/POS devices in the Site tree while in Live mode (main screen).

5.Click Apply.

4a

4b

Figure 101. Event-Relay Link Settings: ATM/POS Link Settings Section

Linking Relay Outputs to Video Loss Events

To set relay outputs to activate in response to a video loss event:

1.On the DX8100 toolbar, click . The Setup dialog box opens to the Camera page.

2.Click .

3.Click the Event-Relay Link Settings tab.

4.In the Video-Loss Link Settings section, do the following:

a.Select a camera from the Video-Loss Channel drop-down box.

b.Click the button for each relay you want to link to the selected Video-Loss Channel.

5.Click Apply.

4a

4b

Figure 102. Event-Relay Link Settings: Video-Loss Link Settings Section

LINKING CAMERAS TO RECORD IN RESPONSE TO EXTERNAL EVENTS

Multiple cameras can be configured to begin recording in response to detected motion, alarm, ATM/POS transaction, and video loss events. This section describes how to link cameras to record in response to these events and includes the following topics:

•Linking Cameras to Record in Response to Motion Events

•Linking Cameras to Record in Response to Alarm Events

•Linking Cameras to Record in Response to ATM/POS Events

•Linking Cameras to Record in Response to Video Loss Events

122 Client Application C2631M-A (6/07)