C2631M-A (6/07) Client Application 121
3. Click the Event-Relay Link Settings tab.
4. In the Motion Detection Link Settings section, do the following:
a. Select a camera channel from the Camera Channel drop-down box.
b. Click the button for each relay you want to link to the selected camera.
You can also drag relays onto cameras in the Site tree while in Live mode (main screen).
5. Click Apply.
Figure 99. Event-Relay Link Settings: Motion Detection Link Settings Section
Linking Relay Outputs to Alarm Events
To set relay outputs to activate in response to an alarm event:
1. On the DX8100 toolbar, click . The Setup dialog box opens to the Camera page.
2. Click .
3. Click the Event-Relay Link Settings tab.
4. In the Alarm Link Settings section, do the following:
a. Select an alarm channel from the Alarm Channel drop-down box.
b. Click the button for each relay you want to link to the selected alarm.
You can also drag relays onto alarms in the Site tree while in Live mode (main screen).
5. Click Apply.
Figure 100. Event-Relay Link Settings: Alarm Link Settings Section
Linking Relay Outputs to ATM/POS Events
To set relay outputs to activate in response to an ATM/POS event:
1. On the DX8100 toolbar, click . The Setup dialog box opens to the Camera page.
2. Click .
3. Click the Event-Relay Link Settings tab.
4
b
4a
4a
4
4
b
4a
4a