Pelco C2631M-A manual Linking PTZ Presets and Patterns to External Events

3.Click the Event-Recording Link Settings tab.

4.In the ATM/POS Record Link Settings section, do the following:

a.Select an ATM/POS address from the ATM/POS address drop-down box.

b.Click the button for each camera you want to begin recording in response to an ATM/POS event.

5.Click Apply.

4a

4b

Figure 105. Event-Recording Link Settings: ATM/POS Record Link Settings Section

Linking Cameras to Record in Response to Video Loss Events

To link multiple cameras to record in response to a video loss event:

1.On the DX8100 toolbar, click . The Setup dialog box opens to the Camera page.

2.Click . The Linking page is displayed.

3.Click the Event-Recording Link Settings tab.

4.In the Video-Loss Record Link Settings section, do the following:

a.Select a camera from the Video-Loss Channel drop-down box.

b.Click the button for each camera you want to begin recording in response to a video loss event.

5.Click Apply.

4a

4b

Figure 106. Event-Recording Link Settings: Video-Loss Record Link Settings Section

LINKING PTZ PRESETS AND PATTERNS TO EXTERNAL EVENTS

The DX8100 can be configured in such a way that motion, alarms, ATM/POS transactions, and video loss events detected by one camera will result in the repositioning of another. Similarly, alarm inputs can be set to trigger camera-positioning presets. Only a single preset or pattern can be linked to a camera.

This section describes how to link PTZ presets and patterns to motion and alarm events, including the following topics:

•Linking PTZ Presets and Patterns to Motion Events

•Linking PTZ Presets and Patterns to Alarm Events

•Linking Presets and Patterns to ATM/POS Events

•Linking Presets and Patterns to Video Loss Events

124 Client Application C2631M-A (6/07)