Pelco C2631M-A Setting the Time of Day, Sending E-mail Notifications in Response to Motion Events, Sending E-mail Notifications in Response to Alarm Events

170 Client Application C2631M-A (6/07)
4. In the Frequency section, select the frequency interval from the drop-down box. Options for sending an e-mail notification include once
every
•1 minute
• 10 minutes
• 30 minutes
• 1 hour
• 3 hours
• 6 hours
Setting the Time of Day
To set the time of day during which e-mail notifications will be sent:
1. On the DX8100 toolbar, click . The Setup dialog box opens to the Camera page.
2. Click . The Notification page is display.
3. Click the Emergency E-mail Notification Setup tab.
4. In the Frequency section, do the following:
a. Click the Start check box to use the spinner buttons, or type the earliest time of day you want e-mail notifications to be sent (for
example, 7:30 a.m.).
b. Click the End check box to use the spinner buttons, or type the latest time of day you want e-mail notifications to be sent (for example,
6:00 p.m.).
5. Click Apply.
Sending E-mail Notifications in Response to Motion Events
E-mail notifications can be sent whenever a camera attached to a DX8100 detects motion.
To cause e-mail notifications to be sent in response to motion events:
1. On the DX8100 toolbar, click . The Setup dialog box opens to the Camera page.
2. Click . The Notification page is displayed.
3. Click the Emergency E-mail Notification Setup tab.
4. In the Notification Items section, do the following:
a. Click the Motion check box.
b. In the Selected Channels field, click once to the right of the word Motion. The Selected Channels dialog box opens.
c. Do one of the following:
• Click the check box for each channel you want to monitor for motion detection events.
• Click Select All to monitor all channels for motion detection.
• Click Deselect All to deselect all channels.
5. Click OK.
6. Click Apply.
Sending E-mail Notifications in Response to Alarm Events
E-mail notifications can be sent whenever an alarm input is activated.
To initiate e-mail notifications to be sent in response activated alarm inputs:
1. On the DX8100 toolbar, click . The Setup dialog box opens to the Camera page.
2. Click . The Notification page is display.
3. Click the Emergency E-mail Notification Setup tab.