Pelco C2631M-A SETTING UP ADVANCED RELAY OUTPUT

C2631M-A (6/07) Client Application 147
SETTING UP ADVANCED RELAY OUTPUT
Relays work much like switches. When triggered, relays can activate external devices such as sirens, light fixtures, and door locks. The DX8100
Series DVR allows Administrators and Power users to link relays to cameras and alarms. Up to 20 seconds of delay can be set from the moment
an event is triggered to the time when a relay is activated.
Make sure you have linked relays to the appropriate cameras and alarm inputs before attempting to configure them. For instructions on linking
alarms and relays, refer to Linking Alarm Inputs to a Camera and Linking Relay Outputs to Alarm Inputs.
This section describes how to setup advanced alarm and motion relay output and includes the following topics:
•Configuring Advanced Motion-Activated Relay Output
•Configuring Advanced Alarm-Activated Relay Output
•Configuring Advanced ATM/POS-Activated Relay Output
•Configuring Advanced Video Loss-Activated Relay Output
Configuring Advanced Motion-Activated Relay Output
To configure a motion relay output:
1. On the DX8100 toolbar, click . The Setup dialog box opens to the Camera page.
2. In the Setup dialog box, click . The Schedule page is displayed.
3. Click the Configure Relays button. The Configure Relays dialog box opens.
4. Click the Motion tab.
5. Configure each relay that is linked to a camera:
a. Click the drop-down box to select a relay.
b. Select a relay time value from the Activation Period drop-down box.
6. Click Save.
7. Click Exit.
Figure 130. Linking Relays to Motion Detection
The following table describes the available options.

5a
5a
5 b