Pelco C2631M-A manual Searching for ALL Transactions with Exceptions

9. On the playback controls, click Forward Playback. The video recorded for the transaction is displayed in the Video window.

￿ 3b

￿

￿

￿

￿

Figure 66. Searching an POS Event by Transaction Number

SEARCHING FOR ALL TRANSACTIONS WITH EXCEPTIONS

The DX8100 allows you to search for transactions that meet conditions defined by one or more exceptions. In this case, you must configure your search criteria based on the following:

•Channel: The camera that captured the video and is linked to the ATM/POS device that produced the transaction data.

•Date/time: The date and time window within which the transactions were recorded.

To use an exception to search transaction data, the exception must be created before recording the transaction data. If the transaction data is recorded before the exception filter is defined, the exception filter will not find the data structure within the transaction data.

To search for only POS events by transaction with exception:

1.On the DX8100 toolbar, click .

2.On the Search control, click . The POS search view is displayed.

3.To select a ATM/POS device, do one of the following:

•In the DX8100 Site tree, click a camera that is linked to the ATM/POS device.

By default, the name of the ATM/POS device linked to the selected camera/channel is displayed in the Device Name text box. In this case, the Device Name text box is deselected.

•Do the following:

(1)In the Transaction Information section, click check box to select Device Name. The Device Name text box is available.

(2)Type the ATM/POS device name in the Device Name text box.

4.Set the date and time range for the search.

5.In the Data Information section, click the check box to select Transaction with Exception Only. The Exception Code check box is available.

6.Click Start Search. If the device name/channel, date, and time are valid, and if transactions with exceptions were recorded during the time range, the transactions are displayed in the POS Search Table.

7.In the POS Search Table, click a transaction. The transaction data is displayed in the Data window.

88 Client Application C2631M-A (6/07)