Pelco C2631M-A Adding an E-mail Notification Group, Modifying an E-mail Group Name, Deleting an E-mail Group

172 Client Application C2631M-A (6/07)
Adding an E-mail Notification Group
To add an e-mail notification group:
1. On the DX8100 toolbar, click . The Setup dialog box opens to the Camera page.
2. Click . The Notification page is displayed.
3. Click the Emergency E-mail Notification Setup tab.
4. In the Mail Group area, do the following:
a. Click Manage Groups. The Group Management dialog box opens.
b. Click Add Group. The Manage Groups dialog box opens.
c. Enter the name of the group. (Group names can be up to 32 characters in length and can include spaces, but not special characters.)
5. Click OK.
6. Click Close.
7. Click Apply.
Modifying an E-mail Group Name
To modify a group name:
1. On the DX8100 toolbar, click . The Setup dialog box opens to the Camera page.
2. Click . The Notification page is displayed.
3. Click the Emergency E-mail Notification Setup tab.
4. In the Mail Group area, do the following:
a. Click Manage Groups. The Group Management dialog box opens.
b. In the Group Name table, select a group.
c. Click Edit Group. The Manage Groups dialog box opens.
d. Edit the existing name or enter a new name for the group.
5. Click OK.
6. Click Close.
7. Click Apply.
Deleting an E-mail Group
To delete a group:
1. On the DX8100 toolbar, click . The Setup dialog box opens to the Camera page.
2. Click . The Notification page is displayed.
3. Click the Emergency E-mail Notification Setup tab.
4. In the Mail Group area, do the following:
a. Click Manage Groups. The Group Management dialog box opens.
b. In the Group Name table, select a group.
c. Click Delete.
5. Click Close.
6. Click Apply.