236 DX8100 Web Client C2631M-A (6/07)
Programming a Pattern
To program a pattern:
1. Drag a camera from the Site tree onto a view panel.
2. Click to enter programming mode.
3. Using the PTZ keypad, select a number for the pattern (1-4).
4. Click .
5. Navigate the camera through a series of movements using the on-screen PTZ, and focus controls.
Certain PTZ devices, like Pelco’s Spectra Series domes, will display an on-screen message with the amount of remaining memory available
for pattern programming.
Figure 248. Programming a Pattern Using Web Client
To stop programming a pattern:
1. Click .
2. Click .
Activating a Pattern
To activate a pattern:
1. Click a pattern number (1-4) on the keypad.
2. Click .
A pattern will repeat indefinitely until it is cleared, another pattern is set, or the on-screen PTZ control is moved.
Figure 249. Activating a Pattern Using Web Client