Pelco C2631M-A Adding a DX8100 Server to a Group with a Known IP Address

224 DX8100 Web Client C2631M-A (6/07)
Adding a DX8100 Server to a Group with a Known IP Address
To add a DX8100 server to a group with a known IP address:
1. Click . The Connection List dialog box opens.
Figure 228. Connection List Dialog Box
2. Do the following:
a. Select a group.
b. Click Add. The Server Information dialog box opens.
Figure 229. Server Information Dialog Box
3. Enter the name of the DX8100 Series DVR you wish to add to the group.
4. Enter the IP address of the DVR.
5. If necessary enter a new base port number (9002 is the default).
Consult your network administrator before assigning or changing port numbers. Make sure that the ports are not blocked internally, but are
protected from external threats by a firewall. Web client and server ports must be identical.
6. If necessary, enter a software upgrade port number (9003 is the default).
7. If necessary, enter a new information port in the Information Port box,(9005 is the default).
8. Click OK. The site appears in the Connection List under the group name.