C2631M-A (6/07) DX8100 Web Client 225

Adding a DX8100 Server to a Group with an Unknown IP Address

To add a remote DVR site to a group in the Connection List when you do not know the IP address:
NOTES: To be successful, the following stipulations must be satisfied:
• Each DVR must be attached to the same subnet.
• The first three octets of the IP address of the subnet must be known.
• The range of addresses used in the last octet of the subnet must be known.
1. Click . The Connection List dialog box opens.
Figure 230. Connection List Dialog Box
2. Do the following:
a. Select a group.
b. Click DX8100 Scan. The DX8100 Scan dialog box opens.
Figure 231. DX8100 Scan Dialog Box
3. If your server is on Network Address Translation (NAT), click the Server on NAT check box.